|
|
21st Annual Conference Proceedings
|
| |
FULL TEXT |
| |
21st Annual Conference Proceedings (April 30 - May 2, 2007) |
| |
|
| |
INDIVIUAL |
|
ANDERSON, Iver E. "Advanced Processing of Metallic Powers for Fossil Energy Applicati ons."ARMSTRONG, Beth, "Protection Systems: Corrosion Resistance Coatings."ARMSTRONG, Timothy R., "Gas Sensors for Fossil Energy Applications.BAKER, Frederick S., "Activated Carbon Composites for Air Separation."BENNETT, James, "Results from a Sidewall Panel Field Trial of a Spall Resistant Refractory Materials Developed at NETL for Slagging Gasifiers." BESMANN, Theodore, "Thermochemical Modeling of Refractory Corrosion in Slagging Coal Gasifiers In Support of Development of Improved Refractory Material."BISCHOFF, Brian. L. , "Development Of Inorganic Membranes For Hydrogen Separation."
BRADY, Michael P., "Multi-Phase High Temperature Alloys: Exploration Of Alumina-Forming, Creep-Resistant Austenitic Stainless Steels."DUPONT, J.N., “Improving The Weldability of Fecral Weld Overlay Coatings.”
HOLCOMB, Gordon R., “Steam Turbine Materials and Corrosion Materials and Corrosion.” HUANG, Lan, "Microstructures of the Hot-Deformed Ti-Al-Nb-W-B Alloys."HURLEY, John P., “Applications for Dispersion-Strengthened Alloys in Thermal Power Systems.”KAD, Bimal K., "Solid State Joining of Oxide Dispersion Strengthened Alloy Tubes."KRAMER, Matthew J., "Characterization and Oxidation Behavior of Silicide Coating on Multiphases MO-Si-B Alloys
MA, K., "Mechanisms of Impurity Effect and Ductility Enhancement of MO and CR Alloys."
MALAVE, V. " Advances in Brazing: High Temperature Brazing of Monolithic 430 to Porous 430L Stainless Steel for Hydrogen Separation Applications."
NATESAN, K., "Corrosion Performance of Structural Alloys for OXY-Fuel Combustion Systems."
NIXDORF, Richard D., "Pilot Facility for the Production of Silicon Carbide Fibrils."
PAGLIERI, Stephen N."A Porous Iron Aluminide Membrane for Hydrogen Separation."
PINT, Bruce A., "Long-Term Performance Ofaluminide Coatings On Fe-Base Alloys."
SANTELLA, Michael, "Advanced Pressure Boundary Materials."SCHNEIBEL, Joachim H., "Nanoprecipitates in Steels."SUN, J. G., "Development of Nondestructive Evaluation Methods for Ceramic Coatings."TATLOCK, Gordon J., "Control of Defects and Microstructure in ODS Alloys."
TORTORELLI, P. F., "Concepts for Smart Protective High-Temperature Coatings." WRIGHT, Ian, "Nabling the Practical Application of Oxide Dispersion-Strengthened Ferritic Steels."
WRIGHT, Richard, "Microstructure And Properties of HVOF-Sprayed Protective Coatings."ZHANG, Y., "Synthesis And Oxidation Performance Of AL-Enriched y+y Coatings on NI-Based Superalloys Via Secondary Aluminizing."
|
|
|
|
|
|
|
|