Materials R&D

Peter F. Tortorelli
Oak Ridge National Laboratory
Post Office Box 2008
1 Bethel Valley Road
Oak Ridge, TN 37831-6134
tortorellipf@ornl.gov
Tel: 865.574.5119
Fax: 865.574.4066

Advanced Research Materials (ARM) Projects:

1. Bespoke Materials Surfaces
   › Contact: Beth Armstrong, armstrongbl@ornl.gov, 865.241.5862
   › Fact Sheet
   › For the 2010 Conference Presentation

1. Understanding Corrosion Mechanisms in Oxy-Fired Systems
   › Contact: Bruce Pint, pintba@ornl.gov, 865.576.2897
   › For the 2010 Conference Presentation
   › For the 2010 Conference Manuscript
   › For the 2011 Conference Presentation
   
   
2. Improving the Performance of Creep Strength-Enhanced Ferritic Steels
   › Contact: Yukinori Yamamoto, yamamotoy@ornl.gov, 865.576.7095
   › Fact Sheet
   › For the 2009 Conference Paper
   › For the 2009 Conference Presentation
   › For the 2010 Conference Presentation
   › For the 2011 Conference Presentation
   › For the 2011 Conference Paper
   
   
3. Development and Scale-Up of Alumina-Forming Stainless Steels
   › Contact: Mike Brady, bradymp@ornl.gov, 865.574.5153
   › AFA Steels website
   › For a poster about AFA Steels
   › For the 2009 Conference Paper
   › For the 2009 Conference Presentation
   › To read about a related project
   › For a poster about this R&D 100 Award winning technology
   › For a highlight about this project
   › For a highlight about commercialization of this technology
   
   
4. Qualification of New, Commercial ODS Alloys for Use in Advanced Fossil Processes
   › Contact: Sebastien Dryepondt, dryepondtsn@ornl.gov, 865.574.4452
   › Poster
   › For the 2008 Conference Paper
   › For the 2010 Conference Presentation
   › For the November 2010 ODS Workshop
   › For the ODS Workshop Presentation
   › For the 2011 Conference Presentation
   
   
5. Development of Lower-cost Ni-Based Alloys and Weldments for Improved High-Temperature Creep-Fatigue Behavior
   › Contact: Phil Maziasz, maziaszpj@ornl.gov, 865.574.5082
   
   
6. Materials Issues in Innovative Turbine Blade Designs
   › Contact: Easo George, georgeep@ornl.gov , 865.574-5085

OTHER PROJECTS:

1. Tubing/piping materials for advanced ultra-supercritical (A-USC) steam
   › Contact: Yukinori Yamamoto, yamamotoy@ornl.gov, 865.576.7095
   › Fact Sheet
   › Poster
   › For the 2010 Conference Presentation
   › For the 2011 Conference Presentation
   
   
2. Turbine materials for A-USC steam conditions
   › Contact: Phil Maziasz, maziaszpj@ornl.gov, 865.574.5082
   › Poster
   › For the 2010 Conference Presentation
   › For the 2011 Conference Presentation
   
   
3. Syngas- and hydrogen-fired land-based utility turbines
   › Contact: Bruce Pint, pintba@ornl.gov, 865.576.2897
   › Poster
   › For a highlight on this coatings technology

CAPABILITIES:

› For more information on the ORNL Corrosion Sciences Group