Advanced Research Materials Program Subcontractor Reports

Boston University

• Development of Hot Pressing as a Low Cost Processing Technique for Fuel Cell Fabrication (2003)

Colorado School of Mines

• Weldability of High Alloys (2003)

Lehigh University

• Weldability of Fe-Al-Cr Overlay Coatings for Corrosion Protection in Oxidizing/Sulfidizing Environments (2003)

ReMaxCo Technologies, Inc.

• Development of a Commercial Process for the Production of Silicon Carbide Fibrils (2002)

Tennessee Technological Institute

• Aluminide Coatings for Power-Generation Applications (2003)

University of California at San Diego

• Optimization of Oxide Dispersion Strengthened Fe3Al Alloy Tubes: Application Specific Development for the Power Generation Industry (2003)

University of Liverpool

• Reduction in Defect Content in ODS Alloys-II

University of Louisville

• Modeling Of Direct Liquid Injection Chemical Vapor Deposition For Thermal Barrier Coatings (2003)
• Modeling of Chemical Vapor Deposited Zirconia for Thermal Barrier and Environmental Barrier Coatings (2003)

University of North Dakota Energy and Environmental Research Center

• Support Services For Ceramic Fiber-Ceramic Matrix Composites (2003)

University of Tennessee

• Study of Fatigue And Fracture Behavior of Cr-Based Alloys and Intermetallic Materials: Effects of Processing on the Microstructure and Mechanical Behavior of Binary Cr-Ta Alloys (2001)

West Virginia University

• Evaluation of The Intrinsic and Extrinsic Fracture Behavior of Iron Aluminides (2001)
• Integrated Research for Predicting Higher Dimensional Phase Diagrams with Emphasis on Ternary Diagrams of Molybdenum, Silicon, and Boron (2003)