| |
1_VANADIUM ALLOYS
- MODELING OF FRICTION STIR WELDING PROCESS FOR FUSION ENERGY APPLICATIONS - G. Aramayo, B. Radhakrishnan, S. A. David, G. Sarma and S. S. Babu (Oak Ridge National Laboratory), pp. 2-5.
- INVESTIGATION OF THE EFFECT OF A LOW-OXYGEN LITHIUM ENVIRONMENT ON THE CREEP OF THE V-4Cr-4Ti ALLOY – M. L. Grossbeck (Oak Ridge National Laboratory), R. J. Kurtz (Pacific Northwest National Laboratory), L. T. Gibson and M. J. Gardner (Oak Ridge National Laboratory, pp. 6-11.
2_CERAMIC COMPOSITE MATERIALS
- EFFECT OF FIBER/MATRIX INTERFACIAL PROPERTIES ON MECHANICAL PROPERTIES OF UNIDIRECTIONAL CRYSTALLINE SILICON CARBIDE COMPOSITES - T. Hinoki, L. L. Snead and E. Lara Curzio (Oak Ridge National Laboratory), J. Park, Y. Katoh and A. Kohyama (Kyoto University), pp. 13-22.
3_FERRITIC/MARTENSITIC STEELS
- FRACTURE SURFACE OF A REDUCED-ACTIVATION MARTENSITIC STEEL IRRADIATED IN HFIR - N. Hashimoto (Oak Ridge National Laboratory), H. Tanigawa (Japan Atomic Energy Research Institute), K. Shiba (JAERI), and R. L. Klueh (ORNL), pp. 24-27.
- EFFECT OF HEAT TREATMENT AND TANTALUM ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Fe-9Cr-2W-0.25V STEEL - R. L. Klueh, N. Hashimoto, and M. A. Sokolov (Oak Ridge National Laboratory), pp. 28-39.
4_COPPER ALLOYS
5_REFRACTORY METALS AND ALLOYS
6_AUSTENITIC STAINLESS STEELS
- FINAL RESULTS ON AN EXPERIMENT TO DETERMINE THE LOWER TEMPERATURE LIMIT OF VOID SWELLING OF STAINLESS STEELS AT RELATIVELY LOW DISPLACEMENT RATES – S. I. Porollo, Y. V. Konobeev, A. M. Dvoriashin, and V. M. Krigan (Institute of Physics and Power Engineering, Obninsk, Russia) and F. A. Garner (Pacific Northwest National Laboratory), pp. 43-55.
- THE EFFECT OF VOID SWELLING ON ELECTRICAL RESISTANCE AND ELASTIC MODULI IN AUSTENITIC STEELS - A. V. Kozlov, E. N. Shcherbakov, S. A. Averin (Research & Development Institute of Power Engineering Zarechny, Russia) and F. A. Garner (Pacific Northwest National Laboratory), pp. 56-64.
- THE PRIMARY ORIGIN OF DOSE RATE EFFECTS ON MICROSTRUCTURAL EVOLUTION OF AUSTENITIC ALLOYS DURING NEUTRON IRRADIATION - T. Okita, T. Sato, N. Sekimura (The University of Tokyo), F. A. Garner and L. R. Greenwood (Pacific Northwest National Laboratory), pp. 65-72.
- STRESS AND TEMPERATURE DEPENDENCE OF IRRADIATION CREEP OF SELECTED FCC AND BCC STEELS AT LOW SWELLING – M. B. Toloczko and F. A. Garner (Pacific Northwest National Laboratory), pp. 73-85.
7_MHD INSULATORS, INSULATING CERAMICS AND OPTICAL MATERIALS
- PROPOSED SPECIFICATIONS FOR CANDIDATE INSULATOR MATERIALS FOR MHD COATINGS - B. A. Pint and J. R. DiStefano (Oak Ridge National Laboratory) pp. 87-90.
- PRELIMINARY INVESTIGATION ON THE DEPOSITION OF Y-O AND SI-O FILMS ON V-4%Cr-4%Ti FOR THE IN-SITU FORMING OF CaO COATINGS - J.-H. Park, A. Sawada, B. J. Kestel, D. L. Rink, K. Natesan, and R. F. Mattas (Argonne National Laboratory), pp. 91-95.
- PROGRESS ON DEVELOPMENT OF IN-SITU COATINGS FOR V-4Cr4Ti - J.-H. Park, A. Sawada, D. L. Rink, K. Natesan, and R. F. Mattas (Argonne National Laboratory), pp. 96-100.
- STUDY OF THE LONG-TERM STABILITY OF MHD COATINGS FOR FUSION REACTOR APPLICATIONS - B. A. Pint and L. D. Chitwood (Oak Ridge National Laboratory), pp. 101-105.
8_BREEDING MATERIALS
9_RADIATION EFFECTS, MECHANISTIC STUDIES, AND EXPERIMENTAL METHODS
- TENSILE PROPERTY ESTIMATES OBTAINED USING A LOW COMPLIANCE SHEAR PUNCH TEST FIXTURE – M. B. Toloczko and R. J. Kurtz (Pacific Northwest National Laboratory), A. Katsunori and A. Hasegawa (Tohoku University, Japan), pp. 108-115.
10_DOSIMETRY, DAMAGE PARAMETERS, AND ACTIVATION CALCULATIONS
- SURPRISINGLY LARGE GENERATION AND RETENTION OF HELIUM AND HYDROGEN IN PURE NICKEL IRRADIATED AT HIGH TEMPERATURES AND HIGH NEUTRON EXPOSURES - L. R. Greenwood, F. A. Garner, and B. M. Oliver (Pacific Northwest National Laboratory), M. L. Grossbeck (Oak Ridge National Laboratory), and W. G. Wolfer (Lawrence Livermore National Laboratory), pp. 117-125.
11_MATERIALS ENGINEERING AND DESIGN REQUIREMENTS
12_IRRADIATION FACILITIES AND TEST MATRICES
|
