Infeed Rate Calculator for Plunge Grinding


	Infeed Rate Calculator for Plunge Grinding

	This calculator can be used to determine the required infeed rate, total grinding time, and volume of material removed for a given Q' (specific material removal rate). It is assumed that this is a straight O.D. plunge grinding operation on a cylindrical grinder. Input the values for the following variables (shown in red) and click the "Calculate" button:

	Wheel Width (mm) =
	Infeed Distance (mm) =
	Workpiece Starting Diameter (mm) =
	Q' (Specific Material Removal Rate (mm3/min/mm) =
	The values will be calculated for the remaining variables:
	Workpiece Ending Diameter (mm) =
	Total Volume of Material Removed (mm³) =
	Total Grinding Time (minutes) =
	Infeed Rate (mm/min) =


	The URL of this page is http://www.html.ornl.gov/mituc/ifrm.htm. Last modified on December 08, 2003 .

	Oak Ridge National Laboratory (ORNL) is operated by UT-Battelle, LLC, for the U.S. Department of Energy.		Disclaimer