Oak Ridge National Laboratory 

Publications List for Jun Qu

 Journal Papers

  1.  Qu, J., Truhan, J., Blau, P.J., and Ott, R., “The Development of a Pin-on-Twin Scuffing Test to Evaluate Materials for Heavy Duty Diesel Fuel Injectors,” Lubrication Engineering, (Submitted).

  2. Qu, J., Riester, L., Shih, A. J., Scattergood, R., Lara-Curzio, E., and Watkins, T., “Nanoindentation Characterization of Surface Layers of Electrical Discharge Machined Wc-Co,” Materials Science and Engineering-A, Vol. 334, 2003, pp. 125-131.

  3. Qu, J., Shih, A.J., and Scattergood, R., “Development of the Cylindrical Wire Electrical Discharge Machining Process, Part I: Concept, Design, and Material Removal Rate,” ASME Journal of Manufacturing Science and Engineering, Vol. 124, No. 3, 2002, pp. 702-707.

  4. Qu, J., Shih, A.J., and Scattergood, R., “Development of the Cylindrical Wire Electrical Discharge Machining Process, Part II: Surface Integrity and Roundness,” ASME Journal of Manufacturing Science and Engineering, Vol. 124, No. 3, 2002, pp. 708-714.

  5. Qu, J., Shih, A.J., Scattergood, R., and Luo, J., “Abrasive Micro-Blasting to Improve Surface Integrity of Electrical Discharge Machined WC-Co Composite,” Journal of Materials Processing Technology, (Submitted).

  6. Qu, J. and Shih, A.J., “Analytical Surface Roughness Parameters of an Ideal Profile Consisting of Elliptical or Circular Arcs,” Machining Science and Technology, (Submitted).

  7. Qu, J. and Sarma, R., “Least Square Curve and Surface Localization for Shape Conformance Checking,” SME Journal of Manufacturing Systems, Vol. 19, No. 5, 2000, pp. 297-304.

  8. Qu, J. and Sarma, R., “Least Square Curve and Surface Localization for Shape Conformance Checking,” Transactions of the NAMRI/SME, 1999, pp. 275-280.

  9. Qu, J. and Sarma, R., “Non-Linear Integrate Approximation of Procedurally Defined Curves Using Integral B-Splines,” Engineering with Computers, (Submitted).

  10. Qu, J. and Shih, A.J., “Surface Investigation of Wire Electrical Discharge Turning,” Chinese Machinery and Electronics, Vol. 120, 2001, pp. 43-44.

  11. Qu, J., Sun, Y., and Qu, G., “Non-Linear Curve Approximation Using Integral B-Splines,” Chinese Machinery Design and Manufacturing, Vol. 147, No. 5, 2001, pp.36-38.

  12. Qu, J. and Zhang, G.X., “Environmental Error Compensation of Displacement Interferometry System,” Chinese Aviation Engine, Vol. 104, No. 3, 2001, pp. 43-44, 3.

  13. Li, D.G., Zhang, G.X., and Qu, J., “Comprehensive Compensation for the Environmental Error Factor in High-Accuracy laser Interferometry,” Chinese Opto-Electronic Engineering, Vol. 26, No. 4, 1999, pp. 28-33.

  14. Dong, C.S., Qu, J., Wang, J.X., Zhang, G.X., and Mu, Y.H., “Description of Motion Accuracy in Coordinate Measuring Machines,” Chinese Aviation Precision Manufacturing Technology, Vol. 34, No.1, 1998, pp. 32-34.

  15.  Zhuang, B.H., Zhang, W.W., Feng, S.G., Qu, J., and Cui, D., “Inner and Exterior Surface Measurement Using Laser Triangulation,” Chinese Measuring Techniques, No.8, 1995, pp. 44-47.

 Conference Papers/Posters

  1. Qu, J., Truhan, J., Blau, P.J., and Ott, R., “The Development of a Scuffing Test to Evaluate Materials for Heavy Duty Fuel Injectors, Part 1. Pin-on-Twin Configuration,” 14th International Conference on Wear of Materials, Washington DC, Mar. 30 – April 3, 2003.

  2. Qu, J., Shih, A.J., and Scattergood, R., “Development of the Cylindrical Wire Electrical Discharge Machining Process,” Symposium on Nontraditional Manufacturing Research and Applications, Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, Vol. 3, IMECE2001/MED-23343, Nov. 11-16, New York, 2001.

  3. Qu, J., Shih, A. J., Scattergood, R. and McSpadden, S. B., “Cylindrical Wire Electrical Discharge Machining Process Development,” Proceedings of the ASPE 2001 Annual Meeting, Vol. 25, Nov. 10-15, 2001, pp. 501-504.

  4. Qu, J. and Sarma, R., "Low-Degree B-Spline Approximation of Procedurally Designed Curves", Proceedings of the 1999 ASME Design Engineering Technical Conference, Vol. 1, 1999, pp. 577-586.

  5. Qu, J. “Development of Cylindrical Wire Electrical Discharge Machining Process,” The National Collegiate Inventors and Innovators Alliance (NCIIA) 5th Annual Conference, Washington D.C., Mar. 2001.





Metals and Ceramics Division
Back to Ron Ott Bio Page

The URL of this page is http://www.html.ornl.gov/mituc/rdopubs.htm.
Last modified on December 04, 2003 .

UT-Battelle Logo

Oak Ridge National Laboratory (ORNL) is operated by
UT-Battelle, LLC, for the U.S. Department of Energy.

Disclaimer