Characterization of mechanical behavior of composites and their constituents (fibers, fiber coatings, interfaces), environmental effects, reliability and durability, modeling of mechanical behavior and constitutive relations, standard test methods and special test configurations.

Education:

• Ph. D. Materials Engineering Rensselaer Polytechnic Institute, Troy, NY, August 1992.
• B. A. Sc. Engineering Physics Autonomous Metropolitan University, Mexico City, Mexico, July, 1986.

Professional:

Development Staff Member:

• Oak Ridge National Laboratory, Materials Science & Technology Division, High Temperature Materials Laboratory, Mechanical Characterization and Analysis Group. Oak Ridge, Tennessee. September 1993-Present.
• Thermomechanical characterization of advanced structural materials, ceramics, fibers and advanced composites. Development of constitutive models for the mechanical behavior and reliability of structural materials and composites. Design and micromechanical characterization of interfacial coatings for continuous fiber composites. Study of environmental effects on the mechanical performance and reliability of structural ceramics and composites. Development of standard test methods for the mechanical characterization of continuous fiber ceramic composites and components. Collaborative research with industries and Universities on the development and characterization of advanced materials through the High Temperature Materials Laboratory User Program and Cooperative Research and Development Agreements.
• Principal Investigator for: U. S. Department of Energy Continuous Fiber Ceramic Composites Program, ORNL Seed Money Program for Development and Characterization of Oxidation-Resistance Interphases for Ceramic Composites, Cooperative Research and Development Agreement between ORNL and Dow Corning Corporation to Characterize the Effect of Fiber and Fiber Architecture on the Time-dependent Deformation of Ceramic Matrix Composites, Cooperative Research and Development Agreement between ORNL and Hyper-Therm, Inc., to Optimize Pseudo-Porous SiC Interphases for SiC/SiC Ceramic Matrix Composites.

Post-doctoral researcher:

• Oak Ridge National Laboratory, Materials Science & Technology Division, High Temperature Materials Laboratory, Mechanical Characterization and Analysis Group. September 1992-August 1993.
• Thermomechanical characterization of advanced structural materials, particularly ceramics, fibers and composites. Development of standard test methods for the mechanical characterization of continuous fiber ceramic composites. Micromechanical characterization of continuous fiber ceramic composites interfaces.

Graduate Research Assistant:

• Rensselaer Polytechnic Institute, Center for Composite Materials and Structures, January 1987-August 1992.
• Characterization of the thermomechanical behavior of ceramic fibers for high temperature structural applications. Development of models of the state of residual stresses and thermomechanical behavior of fibers.

Teaching Assistant:

• Rensselaer Polytechnic Institute, Troy NY. Department of Materials Engineering. Courses: Physical Metallurgy, Spring 1989. Deformation of Materials and Rheology, Fall 1990. Composites Fabrication Laboratory. Spring 1991, Spring 1992. Autonomous Metropolitan University, Mexico City, Mexico. Department of Energy. Courses: Applied Thermodynamics I, Spring 1985, Summer 1985. Applied Thermodynamics II, Fall 1985. Fluid Mechanics, Spring 1986.

Undergraduate Research Assistant:

• Autonomous Metropolitan University, Mexico City, Mexico. Department of Energy, 1984-1986. Participated in the research projects : Computational Methods to Estimate Virial Coefficients, Design, Construction and Evaluation of an Aeolic Energy Converter, Energy Conservation Program for the UAM-A.

Technician:

• Optica Experta, Tlalnepantla, Mexico. August 1982-October 1983.
• Developed a computer-based inventory system and provided technical support in the design, maintenance and repair of optometry equipment for the manufacture of prescription glasses.

Other:

• Instructor for the National Program Against Illiteracy, Tlalnepantla, México. September 1979- January 1982.
• Design Engineer for the program Reconstruction of México City. Carried out calculations for hydraulic, electrical and gas installations for new housing projects in downtown Mexico City, México, after the 1985 earthquakes. September 1985-July 1986.

Research:

• My research interests are in the characterization of advanced materials, ceramics, composites and their constituents.
• Micromechanical characterization and engineering of interfaces.
• Constitutive behavior of fibers and composites.

Life prediction:

• Effects of temperature, stress and environment on the reliability, durability and time-dependent behavior of structural materials.
• Standardization of mechanical test methods.

Current Projects:

• Stress-rupture and stress-relaxation of Carbon/SiC, Sylramic™/SiNCO and Hi-Nicalon™/SiNCO composites.
• Temperature dependence of interlaminar shear strength of ceramic matrix composites.
• Effect of water vapor on the stress-rupture behavior of ceramic matrix composites
• Effect of thermal and mechanical overloading on the reliability of ceramic matrix composites.
• Development of oxidation-resistant fiber coatings for ceramic matrix composites.
• Effect of multiaxial states of stress on the cracking of ceramic matrices.
• Effect of environmental exposure on the transthickness tensile strength of ceramic matrix composites.
• Evaluation of ceramic, ceramic composites and iron-aluminide filters.
• Coordination of round robin program to determine precision and bias of ASTM C1292.
• Detection of cracking and crack growth in oxide coatings.

Activities:

Member of:

• American Society for Testing and Materials (ASTM).
• American Ceramic Society (ACerS).
• ASM International.
• Secretary and vice-Chairman of the American Society for Testing and Materials (ASTM) subcommittee C28.07 on ceramic composites. January 1995-date.
• Member of Executive Committee, ASM-International, Oak Ridge Chapter, 1994-present.
• Co-Chairperson of Coordination Group on Test Methods for Ceramic Matrix Composites, Military Handbook-17, November 1995-date.
• Leader of Task Group on Rules Governing Testing, American Society for Mechanical Engineers (ASME) Boiler and Pressure Vessel Code for Ceramic Matrix Composites, August 1996-date.
• Co-organizer and co-chairperson, Workshop on Thermal and Mechanical Test Methods and Behavior of CFCCs, held in conjunction with the committee meetings of the American Society for Testing and Materials committee C28 on Advanced Ceramics, Montreal, Quebec, Canada June 22-24, 1994.
• Co-Chairperson Session M8, Experimental Verification of Interfacial Behavior, 1994 Fall Meeting of the Materials Research Society, Boston Massachusetts, November 28, 1994.
• Chairperson, Session High Temperature Test Methods, Symposium on Thermal and Mechanical Test Methods and Behavior of Continuous Fiber Ceramic Composites, Cocoa Beach, Florida, January 8, 1996.
• Co-organizer of Symposium on Thermal and Mechanical Test Methods and Behavior of Continuous Fiber Ceramic Composites, Cocoa Beach, Florida, January 7-11, 1996.
• Chairperson, Session Modeling of Mechanical Properties, Ceramic and Metal Matrix Composites, San Sebastián, Spain, September 10, 1996.
• Member, International Scientific Committee for the International Workshop on Modeling of the Mechanical Behavior of Continuous Fiber Reinforced Ceramic Matrix Composites, MCMC'96, held in Petten, The Netherlands, September 16-18, 1996.
• Invited lecturer, First International Workshop on Modeling of the Mechanical Behavior of Continuos Fiber Ceramic Composites, Petten, The Netherlands, September 16, 1996.
• Chairperson, session Life Prediction and Environmental Effects, at First International Workshop on Modeling of the Mechanical Behavior of Continuos Fiber Ceramic Composites, Petten, The Netherlands, September 17, 1996.
• Chairperson, session Mechanical Test Methods & NDE, 21st Annual Cocoa Beach Conference and Exposition, Cocoa Beach, FL. January 15, 1997.
• Member, Re-engineering Committee, High Temperature Materials Laboratory, Oak Ridge National Laboratory, Oak Ridge, TN. 1996-present.
• Chairperson and Session Developer, Stress Rupture of Ceramic Matrix Composites, Fourth International Conference on Composites Engineering, ICCE/4, Kohala Coast, Hawaii, July 6-12, 1997.
• Invited lecturer, 5th Japan International Symposium on Processing Technology and Applications of Ceramic Matrix Composites, Tokyo, Japan October 28-31, 1997.
• Invited lecturer, 100th Annual Meeting of the American Ceramic Society, Cincinnati, OH May 4, 1998.
• Chairperson and Session Developer, Stress Rupture of Ceramic Matrix Composites, Fifth International Conference on Composites Engineering, ICCE/5, Las Vegas, NV, July 4-10, 1998.

Publications:

Books and Book Chapters:

• Thermal and Mechanical Test Methods and Behavior of Continuous Fiber Ceramic Composites, ASTM STP 1309M. G. Jenkins, S. T. Gonczy, E. Lara-Curzio, N. E. Ashgaugh and L. P. Zawada, Editors., American Society for Testing and Materials, Philadelphia, PA 199.
• E. Lara-Curzio and M. K. Ferber, "Determination of Interfacial Properties and Stresses in Continuous Fiber-reinforced Ceramic Composites by Means of Single-fiber Indentation Tests," chapter 12 in Numerical Analysis and Modeling of Composite Materials, Ed. J. W. Bull, Blackie Academic & Professional (1995) pp. 357-39.
• E. Lara-Curzio, "Composite Systems," Chapter 17, Section 1, in Handbook of Ceramic Engineering, Marcel Dekker, New York. in press (1998).

Other Publications:

• E. Lara-Curzio and M. G. Jenkins," Development of Test Standards for CFCCs in the US," Composites A (1998) in press.
• E. Lara-Curzio, "Analysis of Oxidation-Assisted Stress-Rupture of Continuous Fiber-Reinforced Ceramic Matrix Composites at Intermediate Temperatures," Composites A (1998) in press.
• E. Lara-Curzio, "Oxidation-Induced Stress-Rupture of Fiber Bundles," Journal of Engineering Materials and Technology , vol. 120 April 1998, pp. 105-109.
• E. Lara-Curzio and C. M. Russ, "On the Matrix Cracking Stress and the Redistribution of Internal Stresses in Brittle-Matrix Composites," J. Mater. Sci. Eng., A250 (1998) pp. 270-278.
• W. Y. Lee, E. Lara-Curzio and K. L. More, "Multilayered Oxide Interphase Concept for Ceramic Matrix Composites," J. Am. Ceram. Soc., 81 [3] pp. 717-720 (1998).
• F. Rebillat, J. Lamon, R. Naslain, E. Lara-Curzio, M. K. Ferber, and T. M. Besmann, "Properties of Multilayered Interphases in SiC/SiC Chemical-Vapor-Infiltrated Composites with Weak and Strong Interfaces," J. Am. Ceram. Soc., 81 [9] pp. 2315-26 (1998).
• F. Rebillat, J. Lamon, R. Naslain, E. Lara-Curzio, M. K. Ferber, and T. M. Besmann, "Interfacial Bond Strength in SiC/SiC Composite Materials, As Studied by Single-Fiber Push-Out Tests," J. Am. Ceram. Soc., 81 [4] pp. 965-78 (1998).
• E. Lara-Curzio, "Stress-Rupture of Nicalon™/SiC Continuous Fiber Ceramic Composites in Air at 950°C, " J. Am. Ceram. Soc., 8 [12] pp. 3268-72 (1997).
• E. Lara-Curzio and R. P. Boisvert, "Time-Dependent Deformation of Polymer-Derived CFCCs," CFCC Newsletter, August 1997, No. 9 pp. 13-15.
• S. Widjaja, K. Jakus, J. E. Ritter, E. Lara-Curzio, E. Y. Sun, T. R. Watkins, and J. J. Brennan, "Creep-Induced Residual Stress Strengthening in Nicalon™ Fiber-Reinforced BMAS Glass-Ceramic Matrix Composites," J. Am. Ceram. Soc., (1988) in press.
• S. Widjaja, K. Jakus, J. E. Ritter, E. Lara-Curzio, E. Y. Sun, T. R. Watkins, and J. J. Brennan, "High-Temperature Load Transfer in Nicalon™/BMAS Glass-Ceramic Matrix Composites," Ceram. Eng. and Sci., 18, (1997) pp. 681-688.
• E. Lara-Curzio, P. F. Tortorelli and K. L. More, "Stress-Rupture of CFCCs at Intermediate Temperatures, " Ceram. Eng. and Sci., 18, (1997) pp. 209-219.
• E. Lara-Curzio, and C. M. Russ "Redistribution of Internal Stresses and Residual Stresses in Composites: An Approach for Increasing the Matrix Cracking Stress, " Ceram. Eng. and Sci., 18, (1997) pp. 437-446.
• M. C. Jones, E. Lara-Curzio, A. Kopper and D. C. Martin, "Lateral Deformation of Crosslinkable PPXTA Fibers," J. Mater. Sci., 32, 11 (1997) pp. 2855-2871.
• E. Lara-Curzio and M. K. Ferber, "Stress Rupture of Nicalon™/SiC CFCCs at Intermediate Temperatures," J. Mater. Sci. Letters, 16, 1 (1997) pp.23-26.
• E. Lara-Curzio, M. K. Ferber and P. F. Tortorelli, "Interface Oxidation and Stress-rupture of Nicalon™/SiC CFCCs at Intermediate Temperatures," Key Engineering Materials, Vols. 127-131 (1997) pp. 1069-1082.
• J. M. Calderón Moreno, M. R. Elizalde, and E. Lara-Curzio, "Push-out Tests on Small Fibers and Interfacial Properties of a Fiber-reinforced Ceramic Matrix Composite," Key Engineering Materials, Vols. 127-131 (1997) pp. 617-622.
• E. Lara-Curzio and M. K. Ferber, "Shear Strength of Continuous Fiber Reinforced Ceramic Composites," in Thermal and Mechanical Test Methods and Behavior of Continuous Fiber Ceramic Composites, ASTM STP 1309M. G. Jenkins, S. T. Gonczy, E. Lara-Curzio, N. E. Ashgaugh and L. P. Zawada Eds., American Society for Testing and Materials, Philadelphia, PA 1996.
• M. G. Jenkins, J. P. Piccola and E. Lara-Curzio, "Influence of Bending, Test Mode, Test Rate, Specimen Geometry and Grip System on the Tensile Mechanical Behavior of CFCCs," in Thermal and Mechanical Test Methods and Behavior of Continuous Fiber Ceramic Composites, ASTM STP 1309M. G. Jenkins, S. T. Gonczy, E. Lara-Curzio, N. E. Ashgaugh and L. P. Zawada Eds., American Society for Testing and Materials, Philadelphia, PA 1996.
• S. Raghuraman, E. Lara-Curzio and M. K. Ferber, "Modeling of Flexural Behavior of CFCCs using Finite Element Analysis," Ceram. Eng. and Sci., 17, 4 (1996) pp. 147-56.
• E. Lara-Curzio, David Bowers and M. K. Ferber, "The Interlaminar Tensile and Shear Properties of a Unidirectional C/C Composite," J. of Nuclear Materials, 230 (1996) pp. 226-32.
• E. R. Kupp, E. Lara-Curzio, D. P. Stinton, R. A. Lowden and T. M. Besmann, "CVI Processing of Minicomposites for Evaluation of Interface Coating Materials in Composites," CVD XIII, Proceedings of the Thirteenth International Symposium on Chemical Vapor Deposition," Eds. T. M. Besmann, M. D. Allendorf, M. D. Robinson and R. K. Urlich, The Electrochemical Society, Pennington, NJ (1996)a Boron Nitride Matrix," Comp. Sci. Tech., 56, 8 (1996) pp. 967-75.
• M. G. Jenkins, J. P. Piccola, and E. Lara-Curzio, "Onset of Cumulative Damage and the Effects of Test Parameters on the Tensile Behavior of Continuous Fiber-reinforced Ceramic Composites (CFCC)," in Fracture Mechanics of Ceramics, vol. 12., Ed. R. C. Bradt, D. P. H. Hasselman, D. Munz, M. Sakai V. Y. Shevchenko (1995), Plenum Publishing Corp. (USA), pp. 267-282, 1996.
• F. Rebillat, J. Lamon, E. Lara-Curzio, M. K. Ferber andT. M. Besmann," Interfacial Characterization of SiC/SiC Composites with Multilayered Interphases," in High Temperature Ceramic Matrix Composites I: Design, Durability and Performance, A. G. Evans and R. Naslain Eds., Ceramic Transactions, vol. 57, American Ceramic Society, Westerville, OH (1995) pp. 311-316.
• C. H. Hsueh, F. Rebillat, J. Lamon and E. Lara-Curzio, "Analyses of Fiber Push-out Tests Performed on NIcalon™/SiC Composites with Tailored Interfaces," Composites Engineering, 5, 10-11 (1995) 1387-1401.
• E. Lara-Curzio, M. K. Ferber, T. M. Besmann, F. Rebillat and J. Lamon," Fiber-Matrix Bond Strength, Fiber Frictional Sliding and the Macroscopic Tensile Behavior of a 2D SiC/SiC Composite with Tailored Interfaces," Ceram. Eng. and Sci., 16, 5 (1995) 597-612.
• E. Lara-Curzio, M. K. Ferber, R. Boisvert and A. Szweda, "The High Temperature Tensile Fatigue Behavior of Polymer-derived Ceramic Composites," Ceram. Eng. and Sci., 16, 4 (1995) 341-349.
• E. Lara-Curzio and M. K. Ferber, "Evolution of Internal Stresses in Composites During Creep," Ceram. Eng. and Sci., 16, 5 (1995) 791-800.
• S. Shanmugham, P. Liaw, D. P. Stinton, O. J. Shwartz, K. L. More, E. Lara-Curzio, P. Bleier and T. M. Besmann, "Development of Oxidation Resistant Interfacial Coatings for Nicalon™/SiC Composites," Ceram. Eng. and Sci., 16, 4 (1995) 389-399.
• A. A. Wereszczak. M. K. Ferber, T. P. Kirkland and E. Lara-Curzio, "Stress Relaxation of Silicon Nitride at Elevated Temperatures," Ceram. Eng. and Sci., 16, 4 (1995) 519-528.
• M. K. Ferber, E. Lara-Curzio, S. Russ and K. K. Chawla, "Single-fiber Push-in vs. Single-fiber Push-out: A Comparison Between Two Test Methods to Determine the Interfacial Properties of Brittle Matrix Composites," in Ceramic Matrix Composites: Advanced High Temperature Structural Materials, Ed. R. A. Lowden, M. K. Ferber, J. R. Hellmann, K. K. Chawla, S. G. DiPietro, Mat. Res. Soc. Symp. Proc., Vol. 365 (1995) pp. 277-282.
• E. Lara-Curzio and M. K. Ferber, "Evolution of Internal Stresses in Composite Materials During Creep," in Ceramic Matrix Composites: Advanced High Temperature Structural Materials, Ed. R. A. Lowden, M. K. Ferber, J. R. Hellmann, K. K. Chawla, S. G. DiPietro, Mat. Res. Soc. Symp. Proc., Vol. 365 (1995) pp. 259-265.
• E. Lara-Curzio and M. K. Ferber, "Some Considerations for Modeling the Creep Behavior of Composites," Ceram. Eng. and Sci., 15, 4 (1994) 65-75.
• E. Lara-Curzio, M. K. Ferber and R. A. Lowden, "The Effect of Coating Thickness on the Fiber-Matrix Interfacial Properties of CFCCs, " Ceram. Eng. and Sci., 15, 5 (1994) 989-1000.
• M. G. Jenkins, J. P. Piccola, M. D. Mello, E. Lara-Curzio and A. A. Wereszczak, "Mechanical Behavior of a 3-D Braided Continuous SiC Fiber-Reinforced CVI SiC Matrix Composite at Ambient and Elevated Temperatures," Ceram. Eng. and Sci., 15, 4 (1994) 209-218.
• C. G. Cofer, J. Economy, M. K. Ferber and E. Lara-Curzio, "Evaluation of the Interfacial Mechanical Properties of Fiber-reinforced Boron Nitride Matrix Composites," Ceram. Eng. and Sci., 15, 4 (1994) 447-455.
• E. Lara-Curzio, M. K. Ferber, C-H Hsueh, A. A. Wereszczak, and R. A. Lowden, "Application of an Interfacial Test System to the Measurement of Interfacial Properties in Fiber-Reinforced Ceramic Composites," 39th. International SAMPE Symposium, Society for the Advancement of Material Process and Engineering, Anaheim CA, April 11-14, 1994 (1768-1779).
• E. Lara-Curzio, M. K. Ferber and M. G. Jenkins, "Methodologies for the Thermomechanical Characterization of Continuous Fiber-Reinforced Ceramic Matrix Composites: A Review of Test Methods," 39th. International SAMPE Symposium, Society for the Advancement of Material Process and Engineering, Anaheim CA, April 11-14, 1994 (1780-1789).
• T. Gonczy, E. Lara-Curzio, L. Riester, E. P. Butler, S. C. Danforth and W. R. Cannon, "Low-Cost Machining of Ceramic-Fiber Reinforced Ceramic Composites (2-D) and the Effects on Tensile Properties," Proceedings of the 1994 ASME Winter Annual Meeting, Symposium on Processing, Design and Performance of Composite Materials, Chicago, Illinois, November 6-11 (1994).
• M. G. Jenkins, E. Lara-Curzio, M. K. Ferber, and J. A. Salem, "Observations of Inelastic Deformation during High-Temperature Fatigue and Failure of a HIPed Silicon Nitride," Journal of Non-Crystalline Solids, 177, pp. 54-66, (1994).
• E. Lara-Curzio and M. K. Ferber, "Methodology for the Determination of the Interfacial Properties of Brittle Matrix Composites," J. Mater. Sci., 29 (1994) 6152-8
• K. K. Chawla, P. K. Liaw, E. Lara-Curzio, R. A. Lowden and M. K. Ferber, "Effect of Fabric Orientation on the Monotonic and Fatigue Behavior of a Continuous Fiber Ceramic Composite," in High Perpromance Composites: Commonalty of Phenomena, Edited by K. K. Chawla, P. K. Liaw and S. G. Fishman, The Minerals, Metals & Materials Society, 1994 (291-304).
• M. G. Jenkins and E. Lara-Curzio, "Suitable Thermomechanical Tests: Need for New Methods," CFCC News, 2 (1993) 11-13.
• E. Lara-Curzio and M. K. Ferber, "A Good Grip," CFCC News, 3 (1993) 14-15.
• M. G. Jenkins and E. Lara-Curzio, "Standardizing Tests," CFCC News, 4 (1993) 1-3.
• More, K. L., Lara-Curzio, E., Lowden, R. A., "Surface Roughness Characterization of Various Ceramic Fibers Using AFM and Low Voltage SEM Proc. 52nd Annu. Meet. Microsc. Soc. Am., New Orleans, July 31-Aug. 5 (1994) San Francisco Press, San Francisco.
• E. Lara-Curzio and S. S. Sternstein, "Thermoelastic Analysis of Composite Fibers," Comp. Sci. and Tech., 46 (1993) 267-283.
• E. Lara-Curzio, "Multiple Simultaneous Mechanical Testing of Fibers," Scientific Computing and Automation, January 1993. pp. 17-30.
• E. Lara-Curzio and S. S. Sternstein, "The Anomalous Thermal Expansion Behavior of Chemically Vapor Deposited SiC fibers, " To appear in J. Am. Ceram. Society.
• E. Lara-Curzio, S. S. Sternstein, C. R. Hubbard, B. Cavin and W. Porter," High Temperature Structural Stability of Chemically Vapor Deposited SiC Filaments," Mater. Sci. Engng., A172 (1993) 167-171.
• S. S. Sternstein, E. Lara-Curzio and J. W. Beale, "High Temperature Mechanical Characterization of High Performance Fibers," NATAS Conference Proceedings, Atlanta GA. September 17-19, 1992.
• E. Lara-Curzio and S. S. Sternstein, "A High-Temperature Fiber Testing Facility," Meas., Sci. Technol, 2 (1991) 358-368.
• E. Lara-Curzio and S. S. Sternstein, "A Methodology for the Elevated Temperature Characterization of High Performance Fibers," Proceedings American Society for Composites, Sixth Technical Conference, Albany NY, October 1991. pp. 460.
• E. Lara-Curzio, S. S. Sternstein and J. W. Beale, "High Temperature Deformation Studies on CVD SiC Fibers," 35th International SAMPE Symposium Proceedings, Anaheim CA. April 2-5, 1990 1193-1204.

Presentations of authored and co-authored work:

• E. Lara-Curzio, "Environmental Effects on the Reliability of CFCCs," Invited Presentation, 100th Annual Meeting of the American Ceramic Society, Cincinnati, OH May 4, 1998.
• E. Lara-Curzio, "Life Prediction of CFCCs under Stress-Rupture Conditions," Presented at 22nd Annual Cocoa Beach Conference and Exposition, Cocoa Beach, Florida January 20-24, 1998.
• W. Y. Lee, E. Lara-Curzio, and K. L. More, "Multilayered Oxide Interface Concept for Ceramic Matrix Composites," Presented at 22nd Annual Cocoa Beach Conference and Exposition, Cocoa Beach, Florida January 20-24, 1998.
• E. Lara-Curzio, "Effect of Overstress on the Reliability of Continuous Fiber Ceramic Composites under Stress-Rupture Conditions," Presented at 22nd Annual Cocoa Beach Conference and Exposition, ITAR Restricted Sessions, Cocoa Beach, Florida January 25-30, 1998.
• E. Lara-Curzio , "Development of Test Standards for Continuous Fiber Ceramic Composites in the United States," Presented at International Symposium on Ceramic Matrix Composites, 5th Japan International SAMPE Symposium & Exhibition, Tokyo, Japan October 28-31, 1997.
• E. Lara-Curzio , "A Model of the Oxidation-Induced Stress-Rupture of Ceramic Matrix Composites with Carbonaceous Fiber Coatings," Presented at International Symposium on Ceramic Matrix Composites, 5th Japan International SAMPE Symposium & Exhibition, Tokyo, Japan October 28-31, 1997.
• E. Lara-Curzio , "A Model for the Stress-Rupture of Fiber-Reinforced Ceramic Composites at Intermediate Temperatures," Presented at the 4th. International Conference on Composite Engineering ICCE/4, July 7-11, 1997. Kohala Coast, Hawaii.
• E. Lara-Curzio, "Oxidation-Induced Stress-Rupture of Fiber Bundles," Presented at the ASME Turbo Expo '97. International Gas Turbine Institute Meeting, Orlando, FL. June 2-5, 1997.
• D. P. Stinton, E. R. Kupp, E. Lara-Curzio, R. A. Lowden, and T. M. Besmann, "Fiber Protection Layers for Continuous Fiber Ceramic Matrix Composites," Presented at the 99th Annual Meeting and Exposition of the American Ceramic Society, Cincinnati, OH, May 4-7, 1997.
• W. Y. Lee, K. M. Cooley, E. Lara-Curzio, and K. L. More, "Preparation of silica and zirconia coatings by CVD for Nicalon™/SiC Composites," Presented at the 99th Annual Meeting and Exposition of the American Ceramic Society, Cincinnati, OH, May 4-7, 1997.
• K. Jakus, S. Widjaja, J. E. Ritter, E. Lara-Curzio, E. Y. Sun, T. R. Watkins, and J. J. Brennan, "High-Temperature Load Transfer in Nicalon™/BMAS Glass-Ceramic Matrix Composites," Presented at the 99th Annual Meeting and Exposition of the American Ceramic Society, Cincinnati, OH, May 4-7, 1997.
• M. K. Ferber, E. Lara-Curzio, and A. A. Wereszczack, "Time-Dependent Failure of Structural Ceramics and Ceramic Matrix Composites at Elevated Temperatures," Presented at the 99th Annual Meeting and Exposition of the American Ceramic Society, Cincinnati, OH, May 4-7, 1997.
• S. Widjaja, K. Jakus, J. E. Ritter, E. Lara-Curzio, E. Y. Sun, T. R. Watkins, and J. J. Brennan, "High-Temperature Load Transfer in Nicalon™/BMAS Glass-Ceramic Matrix Composites," Presented at the 21st Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Cocoa Beach, Florida January 16, 1997.
• E. Lara-Curzio, P. F. Tortorelli and K. L. More, "Stress-Rupture of Nicalon™/SiC at Intermediate Temperatures, " Presented at the 21st Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Cocoa Beach, Florida January 15, 1997.
• E. Lara-Curzio, and C. M. Russ "Redistribution of Internal Stresses and Residual Stresses in Composites: An Approach for Increasing the Matrix Cracking Stress, " Presented at the 21st Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Cocoa Beach, Florida January 14, 1997.
• E. Lara-Curzio, M. K. Ferber and P. F. Tortorelli, "Interface Oxidation and Stress-Rupture of Nicalon™/SiC CFCCs at Intermediate Temperatures, " Presented at CMMC 96, San Sebastian, Spain, September 9-12, 1996.
• E. Lara-Curzio, M. K. Ferber, P. F. Tortorelli, and K. L. More, "Stress-Rupture of CFCCs," Poster Presentation at CFCC Annual Program Review Meeting, San Diego, CA September 1996.
• E. Lara-Curzio, "Mechanical Characterization of CFCCs," Presentation at CFCC Program Review Meeting, Washington DC December 17, 1996.
• W. Lee, K. M. Cooley, E. Lara-Curzio, T. R. Watkins, S. T. Misture, E. Kupp, and K. L. More, "Phase Transformation as a Means for Promoting Weak Interfacial Behavior in Ceramic Matrix Composites," Presented at the 21st Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Cocoa Beach, Florida January 14, 1997.
• E. R. Kupp, E. Lara-Curzio, D. P. Stinton, T. M. Besmann, "Screening of Interface Coating Materials Using Minicomposites," Presented at the 21st Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Cocoa Beach, Florida January 14, 1997.
• K. L. More, P. F. Tortorelli, H. T. Lin, E. Lara-Curzio, A. Clark, and R. A. Lowden, "Stability of BN Interfaces in Several CFCC Systems During Oxidation," Presented at the 21st Annual Conference on Composites, Advanced Ceramics, Materials and Structures, Cocoa Beach, Florida January 15, 1997.
• E. Lara-Curzio, "Review of Model of Progressive Fiber Debonding and Sliding," Invited talk at the First International Workshop on Modeling of Continuous Fiber Ceramic Composites, Petten, The Netherlands September 16-18, 1996.
• E. Lara-Curzio and Christiana M. Russ, "On the Matrix Cracking Stress and the Redistribution of Residual Stresses in Brittle Matrix Composites," Presented at the First International Workshop on Modeling of Continuous Fiber Ceramic Composites, Petten, The Netherlands September 16-18, 1996.
• E. Lara-Curzio, "Tensile Evaluation of Minicomposites," at the 2nd. Annual Meeting on Interfaces, Knoxville, TN, June 19-20, 1996.
• E. Lara-Curzio and M. K. Ferber, "Shear Strength of Continuous Fiber Reinforced Ceramic Composites," Presented at the Symposium on Thermal and Mechanical test Methods and Behavior of CFCCs, Cocoa Beach Florida, January 8, 1996.
• E. Lara-Curzio, S. Raghuraman, J. Keiser, M. K. Ferber, J. Neogi, B. Harkins and J. Simpson, "Thermomechanical Characterization of CFCC Tubular Components," Presented at the Symposium on Thermal and Mechanical Test Methods and Behavior of CFCCs, Cocoa Beach Florida, January 8, 1996.
• M. G. Jenkins, J. P. Piccola and E. Lara-Curzio, "Influence of Bending, Test Mode, Test Rate, Specimen Geometry and Grip System on the Tensile Mechanical Behavior of CFCCs," Presented at the Symposium on Thermal and Mechanical test Methods and Behavior of CFCCs, Cocoa Beach Florida, January 8, 1996.
• S. Raghuraman, E. Lara-Curzio and M. K. Ferber, "Modeling of Flexural Behavior of CFCCs using Finite Element Analysis," Presented at the 20th Annual Conference on Composites and Advanced Ceramics, Cocoa Beach, Florida January 8 (1996).
• W. Lee, E. Lara-Curzio, K. More, Y. W. Bae, D. P. Stinton, L. Kupp and T. M. Besmann, "Processing and Characterization of CVD Oxide Interface Materials," Presented at the 20th Annual Conference on Composites and Advanced Ceramics, Cocoa Beach, Florida January 10 (1996).
• K. L. More, E. Lara-Curzio, H. T. Lin, P. F. Tortorelli, R. Shinavski and W. S. Steiffer," Multilayered SiC Fiber Coatings in Nicalon™ Fiber-reinforced Ceramic Matrix Composites," Presented at the 20th Annual Conference on Composites and Advanced Ceramics, Cocoa Beach, Florida January 8 (1996).
• E. Lara-Curzio, M. K. Ferber and M. G. Jenkins, "Shear Strength of 2-D CFCCs," Poster Presentation at CFCC Program Review Meeting, Chicago, IL September 1995.
• E. Lara-Curzio and M. K. Ferber, "Some Considerations for Modeling the Creep Behavior of Composites," Presented at the 18th Annual Conference on Composites and Advanced Ceramics, Cocoa Beach, Florida, January 11 (1994).
• E. Lara-Curzio, M. K. Ferber and R. A. Lowden, "The Effect of Coating Thickness on the Fiber-Matrix Interfacial Properties of CFCCs," Presented at the 18th Annual Conference on Composites and Advanced Ceramics, Cocoa Beach, Florida, January 11 (1994).
• E. Lara-Curzio, M. K. Ferber, A. A. Wereszczak, L. Riester and R. A. Lowden, "Evaluation and Modeling of the Interfacial Behavior of CFCCs," Presented at the International Symposium in Metal and Ceramic Composites, TMS, 123rd Annual Meeting and Exhibition, San Francisco, CA February 27-March 3 (1994).
• E. Lara-Curzio, M. K. Ferber, A. A. Wereszczak, and R. A. Lowden, "Development and Application of an Interfacial Test System for the Measurement of Interfacial Properties in Fiber-Reinforced Ceramic Composites," Presented at the International Symposium in Metal and Ceramic Composites, TMS 123rd Annual Meeting and Exhibition, San Francisco, CA February 27-March 3 (1994).
• E. Lara-Curzio, M. K. Ferber, C-H Hsueh, A. A. Wereszczak, and R. A. Lowden, "Application of an Interfacial Test System to the Measurement of Interfacial Properties in Fiber-Reinforced Ceramic Composites," Presented at the 39th. International SAMPE Symposium and Conference, Society for the Advancement of Material Process and Engineering, Anaheim CA, April 13 (1994).
• E. Lara-Curzio, M. K. Ferber and M. G. Jenkins," Methodologies for the Thermomechanical Characterization of Continuous Fiber-Reinforced Ceramic Matrix Composites: A Review of Test Methods," Presented at the 39th. International SAMPE Symposium and Conference, Society for the Advancement of Material Process and Engineering, Anaheim CA, April 13 (1994).
• K. L. More, E. Lara-Curzio and R. A. Lowden, "Characterization of the Surface Roughness of a Variety of Ceramic Fibers Using High Resolution SEM and Atomic Force Microscopy," Presented at the Symposium on Emerging Characterization Techniques, 96th Annual Meeting of the American Ceramic Society, Indianapolis, Indiana, April 23-24 (1994).
• P. F. Tortorelli, E. Lara-Curzio, L. Riester, and M. K. Ferber, "The Use of Indentation Tests To Examine Oxidation Effects on Fiber-Reinforced SiC Composites," Presented at 96th Annual Meeting of the American Ceramic Society, Indianapolis, Indiana, April 23-24 (1994).
• K. K. Chawla, Z. R. Xu, J. S. Ha, E. Lara-Curzio, M. K. Ferber and S. Russ," Interfacial Characteristics in Mullite Fiber/BN Coating/ Mullite Matrix Composites," Presented at 96th Annual Meeting of the American Ceramic Society, Indianapolis, Indiana, April 23-24 (1994).
• E. Lara-Curzio "Development of Standard Test Methods for the Mechanical Evaluation of CFCC", Presented at the DOD-DOE-NASA joint meeting on CFCCs, Oak Ridge National Laboratory, Oak Ridge, TN, May 25 (1994).
• E. Lara-Curzio, "Methodology for the Interfacial Characterization of CFCCs," Presented at the First Workshop on Thermal and Mechanical Test Methods and Behavior of CFCCs, American Society for Testing of Materials, Montreal Canada, June 22 (1994).
• E. Lara-Curzio, "Interfacial Characterization of CFCCs," Presented at the Workshop on Radiation Resistant Ceramic Matrix Composites, Rensselaer Polytechnic Institute, Troy NY, July 12 (1994).
• S. T. Gonczy, E. Lara-Curzio, L. Riester, E. P. Butler, S. C. Danforth and W. R. Cannon, "Low-Cost Machining of Ceramic-Fiber Reinforced Ceramic Composites (2-D) and the Effects on Tensile Properties," Presented at the Symposium on Processing, Design and Performance of Composite Materials, 1994 Winter Annual Meeting of the American Society or Mechanical Engineers, Chicago, Illinois November 6-11 (1994).
• M. K. Ferber, E. Lara-Curzio, S. Russ and K. K. Chawla, "Single-fiber Push-in vs. Single-fiber Push-out: A Comparison Between Two Test Methods to Determine the Interfacial Properties of Brittle Matrix Composites," Presented at the Symposium on Ceramic Matrix Composites and Advanced Structural Materials, The Materials Research Society, Boston, Massachusetts, November 28-December 2 (1994).
• E. Lara-Curzio and M. K. Ferber, "Evaluation of Interfacial Properties of CFCCs by Means of Single-Fiber Push-out and Push-Back Tests," Presented at the Symposium on Ceramic Matrix Composites and Advanced Structural Materials, The Materials Research Society, Boston, Massachusetts, November 28-December 2 (1994).
• E. Lara-Curzio, M. K. Ferber, F. Rebillat and J. Lamon, "Modification of Interfaces in SiC/SiC Composites," Presented at the Symposium on Ceramic Matrix Composites and Advanced Structural Materials, The Materials Research Society, Boston, Massachusetts, November 28-December 2 (1994).
• E. Lara-Curzio and M. K. Ferber, "Evolution of Internal Stresses in Composite Materials During Creep," Presented at the Symposium on Ceramic Matrix Composites and Advanced Structural Materials, The Materials Research Society, Boston, Massachusetts, November 28-December 2 (1994).
• S. Raghuraman, J. F. Stubbins, M. K. Ferber, E. Lara-Curzio and P. F. Tortorelli, "Oxidation Effects on Fiber/Matrix Interfaces in SiC/SiC Composites," Presented at the Symposium on Ceramic Matrix Composites and Advanced Structural Materials, The Materials Research Society, Boston, Massachusetts, November 28-December 2 (1994).
• S. Shanmugham, P. Liaw, D. P. Stinton, O. J. Shwartz, K. L. More, E. Lara-Curzio, P. Bleier and T. M. Besmann, "Development of Oxidation Resistant Interfacial Coatings for Nicalon™/SiC Composites," Presented at the 19th Annual Cocoa Beach Conference & Exposition, Cocoa Beach, Florida, January 8-12 (1995).
• A. A. Wereszczak. M. K. Ferber, T. P. Kirkland and E. Lara-Curzio, "Stress Relaxation of Silicon Nitride at Elevated Temperatures," Presented at the 19th Annual Cocoa Beach Conference & Exposition, Cocoa Beach, Florida, January 8-12 (1995).
• E. Lara-Curzio, M. K. Ferber, R. Boisvert and A. Szweda, "The High Temperature Tensile Fatigue Behavior of Polymer-derived Ceramic Composites," Presented at the 19th Annual Cocoa Beach Conference & Exposition, Cocoa Beach, Florida, January 8-12 (1995).
• E. Lara-Curzio, M. K. Ferber, T. M. Besmann, F. Rebillat and J. Lamon," Fiber-Matrix Bond Strength, Fiber Frictional Sliding and the Macroscopic Tensile Behavior of a 2D SiC/SiC Composite with Tailored Interfaces," Presented at the 19th Annual Cocoa Beach Conference & Exposition, Cocoa Beach, Florida, January 8-12 (1995).
• S. Raghuraman, J. F. Stubbins, M. K. Ferber, E. Lara-Curzio and P. F. Tortorelli, "Effect of Temperature, Stress Oxidation and Loading Mode on R-Curve and Crack Growth in SiC/SiC " Presented at the 97th Annual Meeting of the American Ceramic Society, Cincinnati, OH, April 30-May 3 (1995).
• D. Stinespring, D. F. Collazos, R. K. Gupta, E. Lara-Curzio and D. B. Braski, "Mechanical Properties and Oxidation Resistance of Silicon Nitride Coated Silicon Carbide Fibers," Presented at the 97th Annual Meeting of the American Ceramic Society, Cincinnati, OH, April 30-May 3 (1995).
• C. L. Arnold, K. L. More and E. Lara-Curzio, "Characterization of Modified Ceramic Fiber Surfaces Using AFM," Presented at the 53rd Annual Meeting of the Microscopy Society of America, Kansas City, MO August 14-17 (1995).
• C. L. Arnold, K. L. More and E. Lara-Curzio, "Characterization of Modified Ceramic Fiber Surfaces Using AFM and Push-out Tests," Presented at the 29th Annual Conference of the Microbeam Analysis Society, Breckenridge, CO. August 7-10 (1995).
• K. L. More, R. A. Lowden and E. Lara-Curzio, "Characterization of the Surface Roughness of a Variety of Ceramic Fibers Using High Resolution SEM and Atomic Force Microscopy," Presented at the 96th Annual Meeting of the American Ceramic Society, Indianapolis IN, April 24-28 (1994).
• K. L. More, E. Lara-Curzio and R. A. Lowden, "The Effect of Fiber Surface Roughness on the Interfacial Properties of SiC Matrix Composites," Presented at the 18th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, FL January 9-14 (1994).
• K. L. More, E. Lara-Curzio and R. A. Lowden, "Surface Roughness Characterization of Various Ceramic Fibers Using AFM and Low Voltage SEM," Presented at the 52nd Annual Meeting of the Microscopy Society of America, New Orleans, LA July 31-August 5 (1994).

Other Relevant Publications:

• R. A. Lowden, E. Lara-Curzio, M. K. Ferber, G. Hsueh, and A. Wereszczak, pp. 26-29, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1993.
• E. Lara-Curzio, and M. G. Jenkins, pp. 30-38, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1993.
• C. H. Hsueh, E. Lara-Curzio, R. A. Lowden, M. K. Ferber, pp. 27-32, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for April-May, 1993.
• E. Lara-Curzio, and M. G. Jenkins, pp. 33-36, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for April-May, 1993.
• R. A. Lowden, M. K. Ferber, E. Lara-Curzio, G. Hsueh and K. L. More, pp. 28-30, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1993.
• E. Lara-Curzio, and M. G. Jenkins, pp. 35-40, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1993.
• C. H. Hsueh, E. Lara-Curzio, M. K. Ferber, K. L. More and R. A. Lowden, , pp. 27-36, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1993.
• E. Lara-Curzio, and M. G. Jenkins, pp. 44-49, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1993.
• E. Lara-Curzio, M. K. Ferber, K. L. More, G. Hsueh, and R. A. Lowden, , pp. 33-42, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1994.
• E. Lara-Curzio, and M. G. Jenkins, pp. 51-58, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1994.
• E. Lara-Curzio, M. K. Ferber, K. L. More, G. Hsueh, and R. A. Lowden, , pp. 14-15, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1994
• E. Lara-Curzio, and M. G. Jenkins, pp. 21-25, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1994.
• E. Lara-Curzio, M. K. Ferber, K. L. More, G. Hsueh, and R. A. Lowden, , pp. 17-23, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for April-May, 1994.
• E. Lara-Curzio, and M. G. Jenkins, pp. 31-39, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for April-May, 1994.
• E. Lara-Curzio, M. K. Ferber, K. L. More, G. Hsueh, and R. A. Lowden, , pp. 19-27, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for June-July, 1994.
• M. G. Jenkins and E. Lara-Curzio, pp. 33-36, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for June-July, 1994.
• M. G. Jenkins and E. Lara-Curzio, pp. 29-34, in M. H. Harris, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1994.
• K. L. More, E. Lara-Curzio, M. K. Ferber and R. A. Lowden , pp. 23-24, in M. H. Harris, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1994.
• P. F. Tortorelli, E. Lara-Curzio, J. R. Keiser and L. Riester , pp. 49-52, in M. H. Harris, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1994.
• E. Lara-Curzio and M. G. Jenkins, pp. 25-30, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1994.
• E. Lara-Curzio, pp. 31-34, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1994.
• P. F. Tortorelli, E. Lara-Curzio, J. R. Keiser and L. Riester , pp. 47-49, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1994.
• E. Lara-Curzio, pp. 23-27, in M. H. Harris, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1995.
• E. Lara-Curzio, pp. 35-38, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1995.
• E. Lara-Curzio, and S. Raghuraman, pp. 25-29, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1996.
• E. Lara-Curzio, and S. Raghuraman, pp. 17-22, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1996.
• E. Lara-Curzio, and M. K. Ferber, pp. 23-30, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for April-May, 1996.
• P. F. Tortorelli, E. Lara-Curzio, S. Raghuraman and K. L. More, pp. 47-49, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for April-May, 1996.
• E. Lara-Curzio, pp. 15-18, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for June-July, 1996.
• P. F. Tortorelli, K. L. More, E. Lara-Curzio, and H. T. Lin, pp. 35, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for June-July, 1996.
• E. Lara-Curzio, pp. 29-38, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1996.
• P. F. Tortorelli, K. L. More, E. Lara-Curzio, and H. T. Lin, pp. 59-60, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for August-September, 1996.
• E. Lara-Curzio, pp. 25-33, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1996.
• P. F. Tortorelli, K. L. More, E. Lara-Curzio, and H. T. Lin, pp. 47-48, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1996.
• M. G. Jenkins and E. Lara-Curzio, pp. 33-37, in M. H. Harris, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1997.
• E. Lara-Curzio, pp. 39-48, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1997.
• E. Lara-Curzio, P. F. Tortorelli, K. L. More, H. T. Lin, and S. Widjaja, pp. 57-60, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for December-January, 1997.
• M. G. Jenkins, C. X. Campbell and E. Lara-Curzio, pp. 17-25, in M. H. Harris, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1997.
• E. Lara-Curzio and S. Widjaja, pp. 27-31, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for February-March, 1997.
• M. G. Jenkins, C. X. Campbell and E. Lara-Curzio, pp. 13-23, in M. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Quarterly Progress Report for January-March, 1998.
• E. Lara-Curzio, pp. 25-33, in M. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Quarterly Progress Report for January-March, 1998.
• K. L. More, P. F. Tortorelli, H. T. Lin, E. Lara-Curzio, and, R. A. Lowden, pp. 49-55, in M. H. Rawlins, R. A. Lowden and M. A. Karnitz (compilers) Continuous Fiber Ceramic Composites Program, Task 2 Bimonthly Progress Report for October-November, 1996.