PROJECTS
Stress Analysis in Thin Surface Layers - Vista Engineering Inc.
Development of Infrared Thermal Processing Techniques for Improving the Wear and Corrosion Resistance of Coatings - Caterpillar Inc.
The Effect of Thermal Process Parameters on the Phase Transformation Behavior in Fully Austenitized, Medium-Carbon Alloy Steel - Ispat Inland, Inc.
Recovery Boiler Wall Tube Temperature Measurements - Babcock & Wilcox
Analyses of Weld Overlay Tubes - Babcock & Wilcox
Investigation of Oxidation of Superalloys at High Pressures and Temperatures - GE Aircraft Engines
Evaluation of Filler Metals for Improved Elevated Temperature Strength of Aluminum Welds - Eagle Racing
Pyrowear 53: Dilatometry to Determine Phase Transformation Kinetics - Deformation Control Technology
Dilatometric Study of Phase Transformati and Resultant Phase Fractions in Forged 1550 Steel for Comparison to and Definition of the Microstructures of Induction-Hardened Parts - Cummins Engine Co.
Detection of Fabrication Defects and Oxidation in Aluminum Recycled Scrap Ingots (RSI) - Logan Aluminum
Dilatometric Characterization of the Influence of aStandard Heat-Treating Process (the T-6 Temper) On the Dimensional Stability of a Die Cast Aluminum Alloy - Ohio State University
Hardenability of Next-Generation High-Strength Steels for Oil/Natural Gas Transportation Pipelines - Emc2
Statistical Analysis of Time-Series Data on Temperature and Resistivity Collected from Recovery Boiler Floor Tube Membranes - Mead Central Research
Feasibility Study for Hot Extrusion of High Toughness Cemented Carbide Composite - Smith International, Inc.
Select Alloys, Conduct In-Plant Tests, and Characterize Test Coupons of Candidate Hood Materials - Weirton Steel Corporation
The Effect of Boron and Zirconium on the Resistance of HAYNES® 214™ Alloy to Strain Age Cracking - Haynes International Inc.)
Detection of Plant Cell Dimensions in Loblolly Pine Wood using Micro-CAT Scan Techniques - Weyerhaeuser Company
Determination of True Stress-Strain Curves of Steels at Elevated Temperatures - Caterpillar Inc.
Forming of Thick Section Material using The Vortek Water Stabilized Plasma Lamp - Native American Technologies Company
Residual Stress Determination in FrictionStir Welded 2024-T3 Aluminum - University of South Carolina
Soldering/Brazing for Automotive Aluminum Panels using Arc Lamp as a Heating Method - Ford Motor Company
Rapid Infrared Preheating of Extrusion Die - Alcoa Engineered Products
Fabrication, Heat-Treating Microstructures, and Tensile Testing of a High-strength 3Cr-3W-V(Ta) Alloy Plate - Nooter Consulting Services
Improving the Surface Finishing of Extruded 6262 Alloy Billet - Alcoa Engineered Productx
Energy Savings during the Extrusion of 6061 Alloy - Alcoa Engineered Products
Simulation of Sulfur Segregation in Steels - Caterpillar Inc.
Development of Seal Coatings for Ceramic Refractories for Molten Aluminum - Pyrotek
Thermochemical Optimization of Float Glass Composition - Visteon Glass Systems
Reactive-Gas Inert Anode Concept - MMPaCT, Inc.