|
ORNL
TBC-Related Publications
Alphabetical
by first author
- "The
Effect of Platinum on the Growth and Adhesion of a-Al2O3
Scales," E. C. Dickey, B. A. Pint, K.
B. Alexander and I. G. Wright, in J. Nicholls, ed., High Temperature
Surface Engineering, Institute
of Materials, London, UK, in press.
- "Application
of Infrared Imaging to the Study of Controlled Failure of Thermal
Barrier Coatings", M. K. Ferber,
A. A. Wereszczak, M. Lance, J. A. Haynes, and M. Arana Antelo, Journal
of Materials Science, 35 (2000) 2643-2651.
- "Isothermal
and Cyclic Oxidation of an Air Plasma-Sprayed Thermal Barrier Coating
System", J.A. Haynes, M.K. Ferber, W.D.
Porter, and E.D. Rigney, ASME
Paper 96-GT-286, (1996).
- "Oxidation
and Degradation of a Plasma-sprayed Thermal Barrier Coating System",
J.A. Haynes, E.D. Rigney, M.K. Ferber
and W.D. Porter, Surf. Coat. Tech., 86-87 (1996) 102-108.
- "Damage
Accumulation in Thermally-Cycled Al2O3 Scales
on Plasma-Sprayed NiCrAlY", J.A. Haynes,
M.K. Ferber and W.D. Porter, in P.Y. Hou, M.J. McNallan, R. Oltra,
E.J. Opila, and D.A. Shores, Eds., Proceedings of the Symposium
on High Temperature Corrosion and Materials Chemistry, The
Electrochemical Society, Proceedings Volume 98-99, Eds. (1998)
146-157.
- "Effects
of Platinum Additions and Sulfur Impurities on the Microstructure
and Scale Adhesion Behavior of Single-Phase CVD Aluminide Bond Coatings,"
J.A. Haynes, Y. Zhang, W.Y. Lee, B.A.
Pint, I.G. Wright and K.M. Cooley, Elevated
Temperature Coatings: Science andTechnology III, Ed. J.M. Hampikian
(TMS, Warrendale, PA, 1998) p. 185-196.
- "Characterization
of Alumina Scales Formed During Isothermal and Cyclic Oxidation of
Plasma-Sprayed TBC Systems at 1150°C," J.A.
Haynes, M.K. Ferber, E.D. Rigney, Oxidation of Metals,
52, (1/2), 1999, 31-76.
- "Mechanical
Properties and Fracture Behavior of Interfacial Alumina Scales on
Plasma-Sprayed Thermal Barrier Coatings," J.A.
Haynes, M.K. Ferber, E.D. Rigney, W.D. Porter, Materials
at High Temperature (1999) 16(2), p. 49-69.
- "Thermal
Cycling Behavior of Plasma-Sprayed TBCs with Various MCrAlX Bond Coats"
J. A. Haynes, M.K. Ferber and W.D. Porter,
The Journal of Thermal Spray Technology Volume 9, 1 (2000)
38-48.
- "CVD
Mullite Coatings in High Temperature, High Pressure Water Vapor,"
J.A. Haynes, M.J. Lance, M.K. Ferber,
K.M. Cooley, R.A. Lowden, and D.P. Stinton, Journal of the American
Ceramic Society, 83, 3 (2000) 657 - 659.
- "Effects
of Platinum Additions on the Adherence of Alumina Scales to CVD Aluminide
Bond Coatings", J.A. Haynes, K.L. More,
B.A. Pint, I.G. Wright, K. Cooley, Y. Zhang, submitted to High
Temperature Corrosion and Protection of Materials 5 (2000), Les
Embiez Proceedings.
- "Oxidation
and Degradation of Thermal Barrier Coating Systems", J.A.
Haynes, Ph.D. Thesis, University of Alabama at Birmingham (1997).
- J.A.
Haynes,
"Potential Influences of Bond Coat Impurities and Void Growth on the
Premature Failure of EB-PVD TBCs", submitted to Scripta Materialia
(2000).
- "Effects
of Interface Roughness on residual Stresses in Thermal Barrier Coatings,"
C.H. Hsueh, J.A. Haynes, M.J. Lance,
P.F. Becher, M.K. Ferber, E.R. Fuller, S.A. Langer, W.C. Carter and
W.R. Cannon, The Journal of the American Ceramic Society,
82 [4] 1073-75 (1999).
- "Morphological
Evolution During the Early Stages of Aluminide Coating Growth on a
Single Crystal Superalloy Surface," G.Y. Kim,
W.Y. Lee, J.A. Haynes and T.R. Watkins, submitted to Met. Trans.
(1999).
- "Piezospectroscopic
Characterization of Thermal Barrier Coatings," M.J.
Lance, J.A. Haynes, W.R. Cannon, M.K. Ferber, in Ceramic
Transactions: Nondestructive Evaluation of Ceramics, C.H. Schilling
and J.N. Gray, Eds., American Ceramic Society, Westerville, OH, Vol.
89,p. 229-237 (1998).
- "Monoclinic
Zirconia Distributions in Plasma Sprayed Thermal Barrier Coatings,"
M. J. Lance, J. A. Haynes, M. K. Ferber,
and W. R. Cannon, J. Therm. Spray Technol., Volume 9(1), March
2000, 68 - 72.
- "Effects
of Sulfur Impurity on the Scale Adhesion Behavior of a Desulfurized
Ni-Based Superalloy Aluminized by Chemical Vapor Deposition", W.Y.
Lee, Y. Zhang, I.G. Wright, B.A. Pint and P.K. Liaw, Met.
Trans. A., Vol. 29A, March 1998, 833-841.
- "Influence
of EB-PVD Thermal Barrier Coating Microstructure on Thermal Barrier
Coating System Performance Under Cyclic Oxidation Conditions," C.
Leyens, U. Schulz, B. A. Pint and I. G. Wright, Surface and
Coatings Technology, v.120-121, p.68-76 (1999).
- "Effect
of Gas Pressure on Thermal Conductivity of Zirconia Thermal Barrier
Coating", A. Mogro-Campero, C.A. Johnson
and P.J. Bendarczyk, R.B. Dinwiddie and H. Wang, Surf. Coat. Tech.,
94-95, 102-105 (1997).
- "Evaluation
of TBC Systems on Novel Substrates," B. A. Pint,
I. G. Wright and W. J. Brindley, J. of Thermal Spray Tech., Volume
9(2) June 2000, 198-203.
- "Cyclic
Oxidation Behavior of cast NiCrAl Alloys," B.
A. Pint and I. G. Wright, (1998) in High Temperature Corrosion
and Materials Chemistry, P. Y. Hou, M. J. McNallan, R. Oltra,
E. J. Opila and D. A. Shores eds., Electrochem. Soc. Proc. v.98-9,
p.263-74,
- "Substrate
and Bond Coat Compositions: Factors Affecting Alumina Scale Adhesion,"
B. A. Pint, I. G. Wright, W. Y. Lee,
Y. Zhang, K. Prüßner and K. B. Alexander, Mater. Sci.
Eng., A245, (1998) 201-211.
- "The
Oxidation Behavior of Oxide-Dispersed b-NiAl: I. Short-Term Cyclic
Data and Scale Morphology," B. A. Pint,
Oxid. Met., 49 (1998) 531-60.
- "On
the Formation of Interfacial and Internal Voids in a-Al2O3
Scales," B. A. Pint, Oxid. Met., 48 (1997) 303-28.
- "Characterization
of the High Temperature Oxidation of a TBC-Coated Oxide-Dispersed
b-NiAl Substrate," B. A. Pint, Mater.
High Temps., 14 (1997) 403-12.
- "Evaluation
of TBC-Coated b-NiAl Substrates Without a Bond Coat," B.
A. Pint, B. A. Nagaraj, and M. A. Rosenzweig, (1996) in Elevated
Temperature Coatings: Science and Technology II, N. B. Dahotre,
J. M. Hampikian, and J. J. Stiglich, Eds., TMS Symp. Proc., p.163-74
- "Compositional
Effects on Aluminide Oxidation Performance Objectives for Improved
Bond Coats", B.A. Pint, J.A. Haynes,
K.L. More, I.G. Wright, and C. Leyens, submitted
to ASM-TMS Superalloys 2000, Seven Springs, PA (2000).
- "The
Effect of Grain Size, Porosity and Yttria Content on the Thermal Conductivity
of Nanocrystalline Zirconia", S. Raghavan,
H. Wang, R.B. Dinwiddie, W.D. Porter and M. Mayo, Scripta Mater.,
Vol. 39, No.8, pp. 1119-1125 (1998)
- "Reliability
of Laser Flash Thermal Diffusivity Measurements of Thermal Barrier
Coatings", H. Wang and Ralph B. Dinwiddie,
J. Thermal Spray Tech., Volume 9(2) June 2000, 210-214.
- "Residual
Strain Measurement in Thermal Barrier Coatings," T.
R. Watkins, S. P. Beckman and C. R. Hubbard, in Advances
in X-Ray Analysis, V. 40 CD ROM. Edited by J. V. Gilfrich et al.,
ICDD, (Newtown Square, PA) (1998) 524-33.
- "Stress
Relaxation of MCrAlY Bond Coat Alloys as a Function of Temperature
and Strain", A.A. Wereszczak, J.G. Hemrick,
T.P. Kirkland, J.A. Haynes, T.J. Fitzgerald, and J.E. Junkin, ASME
Paper 98-GT-403, (1998).
- "Some
Effects of Metallic Substrate Composition on Degradation of Thermal
Barrier Coatings," I. G. Wright, B. A.
Pint, W. Y. Lee, K. B. Alexander and K. Prüßner, in High
Temperature Surface Engineering, J. Nicholls, Ed., Institute of
Materials, London, UK, in press.
- "Thermal
barrier coatings issues in advanced land-based gas turbines," W.
P. Parks, Jr., E. E. Hoffman, W. Y. Lee, and I. G. Wright,
J. Thermal Spray, 6 (2), 187-192 (1997).
- "Effects
of Sulfur Impurities and Platinum Incorporation on the Oxidation Behavior
of Aluminide Coatings Synthesized by Chemical Vapor Deposition", Y.
Zhang, Ph.D. Thesis, University of Tennessee at Knoxville,
1998.
- "Synthesis
and Cyclic Oxidation Behavior of a (Ni,Pt)Al Coating on a Desulfurized
Ni-based Superalloy," Y. Zhang, W. Y.
Lee, J. A. Haynes, I. G. Wright, B. A. Pint, K. M. Cooley and P. K.
Liaw, Met. Trans. A, Vol. 30A, October 1999, 2679 – 2687.
- Y.
Zhang, J.A. Haynes, W.Y. Lee, I.G. Wright, B.A. Pint, K.M. Cooley
and P.K. Liaw, "Effects of Pt Incorporation on the Isothermal Oxidation
Behavior of CVD Aluminide Coatings, submitted to Metall. Trans. A
(2000).
- "Metastable
Tetragonal Zirconia Formation and Transformation in Reactively Sputter
Deposited Zirconia Coatings", Z. Ji,
J.A. Haynes, M.K. Ferber and J.M. Rigsbee, Surface and Coatings
Technology (2000), in press.
- "Phase
Formation and Stability in Reactively Sputter Deposited Yttria Stabilized
Zirconia Coatings", Z. Ji, J.A. Haynes,
M.K. Ferber and J.M. Rigsbee, Journal of the American Ceramic Society
(2000), in press.
Back
to Coatings
|
ORNL Home
| Comments
| Disclaimer
|
|