SHaRE Publications

^(A)ORNL-internal research sponsored by another BES Division
^(B)ORNL-internal research sponsored by Office of Fusion Energy Sciences
^(C)ORNL-internal research sponsored by Office of Fossil Energy Advanced Materials
^(D)ORNL-internal research sponsored by High Average Power Laser Program
^(E)SHaRE External User
^(F)ORNL-internal research sponsored by Office of Electricity, Delivery, and Energy Reliability
^(G)ORNL-internal sponsored research by Office of FreedomCAR and Vehicle Technologies
^(H)ORNL-internal research sponsored by LDRD Program
^(I)ORNL-internal research sponsored by Office of Hydrogen, Fuel Cells, and Infrastructure Technologies
^(J)SHaRE staff research
^(K)ORNL-internal research sponsored by Office of Distributed Energy and Electrical Reliability
^(L)ORNL-internal research sponsored by Office of Nuclear Regulatory Research
 

ELECTRON MICROSCOPY FACILITIES:

Journal Publications:

1. ^(E)J.D. Risner, R. Sinclair, and J. Bentley, “Observation of the Effect of Grain Orientation on Chromium Segregation in Longitudinal Magnetic Media,” J. Appl. Phys.99 (2006) 033905.
2. ^(E)J.F. Al-Sharab, F. Cosandey, A. Singhal, G. Skandan, and J. Bentley, “TEM Characterization of Nanostructured MgAl2O4 Synthesized by a Direct Conversion Process from g-Al2O3,” J. Amer. Ceram. Soc.89[7] (2006) 2279.
3. ^(E)T.R. Allen, L. Tan, J. Gan, G. Gupta, G.S. Was, E.A. Kenik, S. Shutthanandan, and S. Thevuthasan, “Microstructural Development in Advanced Ferritic-Martensitic Steel HCM12A,” J. Nucl. Mater. 351 (2006) 174.
4. ^(E)T.R. Allen, J.I. Cole, C.L. Trybus, D.L. Porter, H. Tsai, F. Garner, E.A. Kenik, T. Yoshitake, and J. Ohta, “The Effect of Dose Rate on the Response of Austenitic Stainless Steels to Neutron Radiation,” J. Nucl. Mater.348 (2006) 148.
5. ^(E)C.S. Man, R. Paroni, Y. Xiang, and E.A. Kenik, “On the Geometric Autocorrelation Function of Polycrystalline Materials,” J. Comput. Appl. Math.190 (2006) 200.
6. ^(E)M.G. Perez, E.A. Kenik, M.J. O’Keefe, F.S. Miller, and B. Johnson, “Identification of Phases in Zinc Alloy Powders Using Electron Backscatter Diffraction,” Mater. Sci. Eng. A424[1-2] (2006) 239.
7. ^(E)M.S. Schneider, B. Kad, D.H. Kalantar, B.A. Remington, E.A. Kenik, H. Jarmakani, and M.A. Meyers, “Laser Shock Compression of Copper and Copper-Aluminum Alloys,” Int. J. Impact Eng.32 (2005) 473.
8. ^(B)B.A. Pint, J.L. Moser, and P.F. Tortorelli, “Liquid Metal Compatibility Issues for Test Blanket Modules,” Fusion Eng. Design81 (2006) 901.
9. ^(B)R.L. Klueh, N. Hashimoto, M.A. Sokolov, K. Shiba, and S. Jitsukawa, “Mechanical Properties of Neutron-Irradiated Nickel-Containing Martensitic Steels: I. Experimental Study,” J. Nucl. Mater.357[1-3] (2006) 156.
10. ^(B)R.L. Klueh, N. Hashimoto, M.A. Sokolov, P.J. Maziasz, K. Shiba, and S. Jitsukawa, “Mechanical Properties of Neutron-Irradiated Nickel-Containing Martensitic Steels: II. Review and Analysis of Helium-Effects Studies,” J. Nucl. Mater.357[1-3] (2006) 169.
11. ^(A)J.H. Schneibel, M.P. Brady, J.J. Kruzic, and R.O. Ritchie, “On the Improvement of the Ductility of Mo by Spinel (MgAl2O4) Particles,” Zeitschrift fur Metallkunde96[6] (2005) 632.
12. ^(A)R.I. Barabash, O.M. Barabash, G.E. Ice, C. Roder, S. Figge, S. Einfeldt, D. Hommel, T.M. Katona, J.S. Speck, S.P. DenBaars, and R.F. Davis, “Characterization of Crystallographic Properties and Defects via X-Ray Microdiffraction in GaN (0001) Layers,” Physica Status Solidi A203[1] (2006) 142.
13. ^(A)O.M. Barabash, R.I. Barabash, S.A. David, and G.E. Ice, “Residual Stresses, Thermomechanical Behavior and Interfaces in the Weld Joint of Ni-Based Superalloys,” Adv. Eng. Mater.8[3] (2006) 202.
14. ^(C)Y. Zhang, B.A. Pint, K.M. Cooley, and J.A. Haynes, “Effect of Nitrogen on the Formation and Oxidation Behavior of Iron Aluminide Coatings,” Surf. Coatings Tech.200 (2005) 1231.
15. ^(C)Y. Zhang, B.A. Pint, J.A. Haynes, and I.G. Wright, “A Platinum-Enriched g+g¢ Two-Phase Bond Coat on Ni-Based Superalloys,” Surf. Coatings Tech.200 (2005) 1259.
16. ^(D)N. Hashimoto, J.D. Hunn, N. Parikh, S. Gilliam, S. Gidcumb, B. Patnaik, and L.L. Snead, “Helium Retention of Ion-Irradiated and Annealed Tungsten Foils,” Fusion Science and Technology47[1] (2005) 881.
17. ^(D)N. Hashimoto, J.D. Hunn, N. Parikh, S. Gilliam, S. Gidcumb, B. Patnaik, and L.L. Snead, “Microstructural Analysis on Helium Retention of Ion-Irradiated and Annealed Tungsten Foils,” J. Nucl. Mater.347[3] (2006) 307.
18. ^(A)C. Liang and S. Dai, “Synthesis of Mesoporous Carbon Materials via Enhanced Hydrogen-Bonding Interaction,” J. Amer. Chem. Soc.128 (2006) 5316.
19. ^(C)S. Dryepondt, Y. Zhang, and B.A. Pint, “Creep and Corrosion Testing of Aluminide Coatings on Ferritic-Martensitic Substrates,” Surf. Coatings Tech.201 (2006) 3880.
20. ^(C)B.A. Pint, J.A. Haynes, Y. Zhang, K.L. More, and I.G. Wright, “The Effect of Water Vapor on the Oxidation Behavior of Ni-Pt-Al Coatings and Alloys,” Surf. Coatings Tech.201 (2006) 3852.
21. ^(F)E.D. Specht, A. Goyal, J. Li, P.M. Martin, X. Li, and M.W. Rupich, “Stacking Faults in YBa2Cu3O7-x: Measurement Using X-Ray Diffraction and Effects on Critical Current,” Appl. Phys. Lett.89 (2006) 162510.
22. ^(F)T. Aytug, M. Paranthaman, A.A. Gapud, S. Kang, H.M. Christen, K.J. Leonard, P.M. Martin, J.R. Thompson, D.K. Christen, R. Meng, I. Rusakova, C.W. Chu, and T.H. Johansen, “Enhancement of Flux Pinning and Critical Currents in YBa2Cu3O7-dFilms by Nanoscale Iridium Pretreatment of Substrate Surfaces,” J. Appl. Phys.98 (2005) 114309.
23. ^(F)T. Aytug, M. Paranthaman, K.J. Leonard, H.Y. Zhai, M.S. Bhuiyan, E.A. Payzant, A. Goyal, S. Sathyamurthy, D.B. Beach, P.M. Martin, D.K. Christen, X. Li, T. Kodenkandath, U. Schoop, M.W. Rupich, H.E. Smith, T. Haugan, and P.N. Barnes, “Assessment of Chemical Solution Synthesis and Properties of Gd2Zr2O7 Thin Films as Buffer Layers for Second-Generation High-Temperature Superconductor Wires,” J. Mater. Res.20[11] (2005) 2988.
24. ^(F)Y. Xu, A. Goyal, K.J. Leonard, E.D. Specht, D. Shi, and M. Paranthaman, “Processing Dependence of Texture, and Critical Properties of YBa2Cu3O7-d Films on RABiTS Substrates by a Non-Fluorine MOD Method,” J. Amer. Ceram. Soc.89[3] (2006) 914.
25. ^(F)S.H. Wee, A. Goyal, P.M. Martin, J. Li, M. Paranthaman, and L. Heatherly, “Strong Flux-Pinning in Epitaxial NdBa2Cu3O7-d Films with Columnar Defects Comprised of Self-Assembled Nanodots of BaZrO3,” Supercon. Sci. Tech.19[10] (2006) L42.
26. ^(B)Y. Katoh, N. Hashimoto, S. Kondo, L.L. Snead, and A. Kohyama, “Microstructural Development in Cubic Silicon Carbide During Irradiation at Elevated Temperatures,” J. Nucl. Mater.351[1-3] (2006) 228.
27. ^(B)N. Hashimoto, T.S. Byun, and K. Farrell, “Microstructural Analysis of Deformation in Neutron-Irradiated FCC Materials,” J. Nucl. Mater.351[1-3] (2006) 295.
28. ^(G)J.P. Shingledecker, P.J. Maziasz, N.D. Evans, M.L. Santella, and M.J. Pollard, “CF8C Plus: A New High Temperature Austenitic Casting Alloy for Advanced Power Systems,” Energy Materials1 (2006) 25.
29. ^(E)R. Campbell, M. Bakker, G. Havrilla, V. Montoya, E.A. Kenik, and M. Shamsuzzoha, “Preparation of Mesoporous Silica Templated Metal Nanowire Films on Foamed Nickel Substrates,” Microporous and Mesoporous Materials97 (2006) 114121.
30. ^(H)T.G. Nieh, M. Zhang, S.J. Zinkle, T.E. McGreevy, D.T. Hoelzer, and S.A. Speakman, “Effect of Texture on the High Temperature Mechanical Properties of Nb-1%Zr Alloy,” Scripta Mater.55 (2006) 719.
31. ^(I)I.E. Paulaskas, M.P. Brady, H.M. Meyer III, R.A. Buchanan, and L.R. Walker, “Corrosion Behavior of CrN, Cr2N, and p Phase Surfaces on Nitrided Ni-50Cr for Proton Exchange Membrane Fuel Cell Bipolar Plates,” Corrosion Science48 (2006) 3157.
32. ^(I)M.P. Brady, P.F. Tortorelli, K.L. More, E.A. Payzant, B.L. Armstrong, H.-T. Lin, M.J. Lance, F. Huang, and M.L. Weaver, “Coating and Near-Surface Modification Design Strategies for Protective and Functional Surfaces,” Materials and Corrosion56 (2005) 748.
33. ^(I)M.P. Brady, B. Yang, H. Wang, J.A. Turner, K.L. More, and F. Garzon, “The Formation of Protective Nitride Surfaces for PEM Fuel Cell Metallic Bipolar Plates,” J. of the Minerals, Metals & Materials Society58[8] (2006) 50.
34. ^(E)Y. Li, J. Xiang, F. Qian, S. Gradecak, Y. Wu, H. Yan, D.A. Blom, and C.H. Lieber, “Dopant-Free GaN/AlN/AlGaN Radial Nanowire Heterostructures as High Electron Mobility Transistors,” Nano Letters6[7] (2006) 1468.
35. ^(C)T. Byun and N. Hashimoto, “Strain Localization in Irradiated Materials,” Nucl. Eng. Tech.38[7] (2006) 619.

Conference Proceedings:

1. ^(A)J. Bentley and D.T. Hoelzer, “Imaging Nanoclusters in Mechanically Alloyed ODS Ferritic Steels by EFTEM,” Proceedings 16th International Microscopy Congress (IMC16), H. Ichinose and T. Sasaki, eds. (2006) 1603. IMC16 held in Sapporo, Japan, September 3-8, 2006.
2. ^(E)J.E. Wittig, Y. Fu, C.M. Lukehart, W.H. Morris III, M.S. Wellons, R.D. Rutledge, J. Bentley, Z. Gai, J. Shen, and B. Lu, “Microstructure and Magnetic Properties of FePt Multilayers and Nanoparticles,” Proceedings 16th International Microscopy Congress (IMC16), H. Ichinose and T. Sasaki, eds. (2006) 1521. IMC16 held in Sapporo, Japan, September 3-8, 2006.
3. ^(E)J. Bentley, J.F. Al-Sharab, and F. Cosandey, “EDS and EELS Spectrum Imaging of Nanostructured Al2O3-MgO-MgAl2O4,” Proceedings 16th International Microscopy Congress (IMC16), H. Ichinose and T. Sasaki, eds. (2006) 1719. IMC16 held in Sapporo, Japan, September 3-8, 2006.
4. ^(E)J. Bentley, S.R. Gillis, C.B. Carter, J.F. Al-Sharab, F. Cosandey, I.M. Anderson, and P.J. Kotula, “Nanoscale EELS Analysis of Oxides: Composition Mapping, Valence Determination, and Beam Damage,” Journal of Physics: Conference Series 26, P.D. Brown, et al., eds., Institute of Physics Publishing (2006) 69. Proceedings from EMAG-NANO 05: Imaging, Analysis and Fabrication on the Nanoscale held in Leeds, UK, August 31- September 2, 2005.
5. ^(E)J. Bentley, J.F. Al-Sharab, and F. Cosandey, “EDS and EELS Spectrum Imaging of Nanostructured Al2O3-MgO-MgAl2O4,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 144.
   Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
6. ^(E)J. Bentley, J.K. Farrer, M.T. Johnson, and C.B. Carter, “Forsterite Formed on MgO Single Crystals During In-Situ Annealing,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 814CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
7. ^(J)H. Demers, R. Gauvin, D.C. Joy, and E.A. Kenik, “Variations in Peak Position and Energy Resolution for a Microcalorimeter EDS by Temporal X-Ray Spectroscopy,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1442CD.Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
8. ^(J)E.A. Kenik and H. Demers, “Spectrum Imaging with a Microcalorimeter EDS Detector on a FEG-SEM,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 140.Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
9. ^(J)J. Bentley, “Diffraction-Contrast Analysis of Dislocation Loops in BCC Alloys,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 898CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
10. ^(E)Y. Fu, J.E. Wittig, J. Bentley, N.D. Evans, and B. Lu, “Microstructure and Magnetic Properties of FePt/MgO Multilayers,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 986CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
11. ^(E)J. Bentley, K.-C. Chang, Y. Cao, and L.M. Porter, “Composition of 4H-SiC/SiO2 Interfaces by Electron Energy-Loss Spectroscopy,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1142CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
12. ^(K)N.D. Evans, Y. Yamamoto, P.J. Maziasz, and J.P. Shingledecker, “Age Induced Gamma Prime Coarsening and Hardness Behavior in Pyromet 31V,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1044CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
13. ^(K)J. Li and A. Goyal, “Method to Separate In-Plane and Out-of-Plane Misorientation From the Total Misorientation at Grain Boundaries in Polycrystalline YBCO Films,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1074CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
14. ^(K)J. Li, S. Kang, and A. Goyal, “Extended BaZrO3 Nanodot Columns in Thick YBa2Cu3O7 Film,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 566CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
15. ^(K)J. Li and I.M. Anderson, “Rocking-Beam Variable Coherence Electron Microscopy: An Alternative Approach to Fluctuation Electron Microscopy,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 672CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
16. ^(J)D.C. Joy, Y. Lin, H.M. Meyer III, H. Demers, and D.E. Newbury, “Secondary Electron Generation by Low Energy Ion Beams,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1446CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
17. ^(E)J.F. Al-Sharab, F. Cosandey, G.G. Amatucci, and J. Bentley, “EELS Compositional Imaging of FeF2-C Nanocomposites Used as a New Positive Electrode in Li-Ion Batteries,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1182CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
18. ^(A)N. Gallego, F.S. Baker, C.I. Contescu, X. Wu, S.A. Speakman, H. Tekinalp, and D. Edie, “Effect of Pd on the Hydrogen Adsorption Capacity of Activated Carbon Fibers,” Proceedings of The International Conference on Carbon 2006 (2006) 10A2. Carbon 2006 held in Aberdeen, Scotland, July 16-21, 2006.
19. ^(A)R. Barabash, C. Roder, G.E. Ice, S. Einfeldt, J.D. Budai, W. Liu, O.M. Barabash, S. Figge, and D. Hommel, “Spatially-Resolved Characterization of Microstructure, Defects, and Tilts in GaN Layers Grown on Si (111) Substrates by Maskless Cantilever Epitaxy,” Materials Research Society Symposium Proceedings, 934, M. Brongersma, D.S. Gardner, M. Lipson, and J.H. Shin, eds., Published by The Materials Research Society, Warrendale, PA (2006) 109. MRS 2005 Spring Meeting held in San Fransisco, CA, March 28 – April 1, 2005.
20. ^(A)O.M. Barabash, J.A. Horton, S.S. Babu, J.M. Vitek, S.A. David, G.E. Ice, and R.I. Barabash, “Multiscale Characterization of Deformation Mechanisms in the Weld Joint of a Ni-Based Superalloy,” Materials Research Society Symposium Proceedings 882E, R.E. Rudd, T.J. Balk, W. Windl, and N. Bernstein, eds., Published by The Materials Research Society, Warrendale, PA (2006) EE4.11.1. MRS 2005 Spring Meeting held in San Fransisco, CA, March 28 – April 1, 2005.
21. ^(C)J.H. Schneibel, J.J. Kruzic, and R.O. Ritchie, “Development of Ultra-High Temperature Molybdenum Borosilicates,” Proceedings of the 20th Annual Conference on Fossil Energy Materials (2006) 56. Fossil Energy Materials Conference held in Knoxville, TN, June 12-14, 2006.
22. ^(C)Y. Yamamoto, M.P. Brady, Z.P. Ping, and C.T. Liu, “Multi-phase High-Temperature Alloys: Exploration of Laves-Strengthened Steels,” Proceedings of the 20th Annual Conference on Fossil Energy Materials (2006). Fossil Energy Materials Conference held in Knoxville, TN, June 12-14, 2006.
23. ^(K)J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard, “Creep Behavior of a New Cast Austenitic Alloy,” Creep and Fracture in High Temperature Components: Proceedings of  European Creep Collaborative Committee (ECCC) Creep Conference 2005, I.A. Shibli, S.R. Holdsworth, and G. Merckling, eds., DEStech Publications (2005) 99. ECCC 2005 held in London, UK, September 12-14, 2005.
24. ^(B)R.L. Klueh, N.D. Evans, P.J. Maziasz, and V.K. Sikka, “Creep Rupture Behavior of 3Cr-3W-V Bainite Steels,” Creep and Fracture in High Temperature Components: Proceedings of European Creep Collaborative Committee (ECCC) Creep Conference 2005, I.A. Shibli, S.R. Holdsworth, and G. Merckling, eds., DEStech Publications (2005) 119. ECCC 2005 held in London, UK, September 12-14, 2005.
25. ^(K)P.J. Maziasz, J.P. Shingledecker, N.D. Evans, Y. Yamamoto, K.L. More, R. Trejo, and E. Lara-Curzio, “Creep Strength and Microstructure of AL20-25+Nb Alloy Sheets and Foils for Advanced Microturbine Recuperators,” Proceedings of TurboExpo 2006, ASME Paper #GT2006-90195. ASME/IGTI TurboExpo 2006 held in Barcelona, Spain, May 8-11, 2006.

Book Chapters:

1. ^(F)A. Goyal, S. Sukill, and J. Li, “Massive Enhancement in Flux Pinning by Columnar Defects via 3D Self-Assembly of Non-Superconducting Nanodots Within Superconducting Films on Technical Substrates,” Book Chapter in Flux Pinning and AC Loss Studies on YBCO-Coated Conductors (2006) Nova Science Publishers.

In Press:

1. ^(A)D.T. Hoelzer, J. Bentley, M.A. Sokolov, M.K. Miller, G.R. Odette, and M.J. Alinger, “Influence of Particle Dispersion on the High-Temperature Strength of Ferritic Alloys,” J. Nucl. Mater., in press.
2. ^(C)Y. Zhang, A.P. Liu, and B.A. Pint, “Interdiffusion Behavior of Aluminide Coatings on Fe-Base Alloys,” Acta Mater., in press.
3. ^(A)K.J. Leonard, J.T. Busby, and S.J. Zinkle, “Aging Effects on Microstructural and Mechanical Properties of Select Refractory Metal Alloys for Space Reactor Applications,” J. Nucl. Mater., in press.
4. ^(A)K.J. Leonard, J.T. Busby, and S.J. Zinkle, “Microstructural and Mechanical Property Changes with Aging of Mo-41Re and Mo-47.5Re Alloys,” Met. Mater. Trans. A, in press.
5. ^(F)A. Goyal and J. Li, “Extraction of Misorientation Components from the Total Misorientation at Grain Boundaries Using Convergent Beam Electron Diffraction in Y0.9Sm0.1Ba2Cu3O7 Films,” Journal of Electron Microscopy, in press.
6. ^(I)M.P. Brady, B. Yang, H. Wang, J.A. Turner, K.L. More, M. Wilson, and F. Garzon, “Formation of Protective Nitride Surfaces for PEM Fuel Cell Metallic Bipolar Plates,” J. of Metals, in press.
7. ^(I)M.P. Brady, H. Wang, B. Yang, J.A. Turner, M. Bordigon, M. Abd Elhamid, L. Lipp, and L.R. Walker, “Growth of Cr-Nitrides on Commercial Ni-Cr and Fe-Cr Base Alloys to Protect PEMFC Bipolar Plates,” Inter. J. of Hydrogen Energy, in press.
8. ^(K)P.J. Maziasz, J.P. Shingledecker, N.D. Evans, Y. Yamamoto, K.L. More, R. Trejo, and E. Lara-Curzio, “Creep Strength and Microstructure of AL20-25+Nb Alloy Sheets and Foils for Advanced Microturbine Recuperators,” J. of Engineering for Gas Turbines and Power, in press.
9. ^(A)O.M. Barabash, R.I. Barabash, G.E. Ice, S.A. David, Z. Feng, and J.A. Horton, “X-Ray Microbeam Characterization of the Near Surface Nanostructured Layer in Ti After Friction Stir Processing,” Reviews on Advanced Materials Science, in press.

NANOINDENTER FACILITIES:

Journal Publications:

1. ^(E)Y.F. Gao, B.N. Lucas, J.C. Hay, W.C. Oliver, and G.M. Pharr, “Nanoscale Incipient Asperity Sliding and Interface Micro-Slip Assessed by the Measurement of Tangential Contact Stiffness,” Scripta Materialia55[7] (2006) 653.
2. ^(J)J.H. Strader, S. Shim, H. Bei, W.C. Oliver, G.M. Pharr, “An Experimental Evaluation of the Constant b Relating the Contact Stiffness to the Contact Area in Nanoindentation,” Philos. Mag. A 86[33-35] (2006) 5285.
3. ^(J)A. Rar, G.M. Pharr, W.C. Oliver, E. Karapetian, S.V. Kalinin, “Piezoelectric Nanoindentation,” J. Mater. Res.21[3] (2006) 552.

Conference Proceedings:

1. ^(E)S. Wen, J. Bentley, J.I. Jang, and G.M. Pharr, “Indentation Rate Effect on Pop-Out in Silicon Studied by Cross-Sectional TEM,” Proceedings 16th International Microscopy Congress (IMC16), H. Ichinose and T. Sasaki, eds. (2006) 1468. IMC16 held in Sapporo, Japan, September 3-8, 2006.

In press:

1. ^(E)J. Jang, S. Shim, S. Komazaki, and T. Honda, “A Nanoindentation Study on Grain-Boundary Contributions to Strengthening and Aging Degradation Mechanisms in Advanced 12Cr Ferritic Steels,” J. Mater. Res., in press.
2. ^(J)S. Shim, W.C. Oliver, and G.M. Pharr, “A Comparison of 3D Finite element Simulations for Berkovich and Conical Indentation of Fused Silica,” Inter. J. Surf. Sci. Eng., in press.
3. ^(A)H. Bei, E.P. George, and G.M. Pharr, “Small-Scale Mechanical Behavior of Intermetallics and Their Composites,” Mater. Sci. Eng. A, in press.
4. ^(J)A. Rar, G.M. Pharr, W.C. Oliver, and S.V. Kalinin, “Measurements of Local Piezoelectric Response of Material During Nanoindentation,” Mater. Res. Soc. Symp. Proc. 2005 Fall Meeting, 2005 MRS Fall Meeting held in Boston, MA, November 28 – December 2, 2005, in press.
5. ^(J)G. Pharr and J. Jang, “Cracking During Nanoindentation of Si and Ge and its Relation to Fracture Toughness,” Mater. Res. Soc. Symp. Proc. (Symposium BB), 2005 MRS Fall Meeting, 2005 MRS Fall meeting held in Boston, MA, November 28 – December 2, 2005, in press.
6. ^(A)E.P. George, H. Bei, and G.M. Pharr, “Relating the Small-Scale Mechanical Behavior of Multiphase Intermetallics to Bulk Properties,” Mater. Res. Soc. Symp. Proc. (Symposium II8) 2006 MRS Fall Meeting, November 30 – December 4, 2006, in press.

ATOM PROBE FACILITIES:

Journal Publications:

1. ^(J)M.K. Miller “Atom Probe Tomography Characterization of Solute Segregation to Dislocations,” Microsc. Res. Tech.69 (2006) 359. Journal Cover.
2. ^(L)M. K. Miller R.K. Nanstad, M.A. Sokolov, and K. F. Russell, “The Effects of Irradiation, Annealing and Reirradiation on RPV Steels,” J. Nucl. Mater. 351 (2006) 216.
3. ^(L)M. K. Miller, M.A. Sokolov, R.K. Nanstad, and K. F. Russell, “APT Characterization of High Nickel RPV Steels,” J. Nucl. Mater.351 (2006) 187.
4. ^(A)M.K. Miller, K.F. Russell, and D. T. Hoelzer, “Characterization of Precipitates in MA/ODS Ferritic Alloys,” J. Nucl. Mater. 351 (2006) 261.
5. ^(A)M.K. Miller, C.T. Liu, J.A. Wright, W. Tang, and K. Hildal, “APT Characterization of Some Iron-Based Bulk Metallic Glasses,” Intermetallics14[8-9] (2006) 1019.
6. ^(E)S. Tin, L. Zhang, G. Brewster and M.K. Miller, “Investigation of Oxidation Characteristics and Atomic Partitioning in Platinum and Ruthenium Bearing Single-Crystal Ni-based Superalloys,” Metall. And Mater. Trans.37A[5] (2006) 1389.
7. ^(E)L. Kovarik, M.K. Miller, S.A. Court, and M.J. Mills, “Origin of the Modified Orientation Relationship for S(S¢¢)-Phase in Al-Mg-Cu Alloys,” Acta Mater.54 (2006) 1731.
8. ^(E)V. Radmilovic, M.K. Miller, D. Mitlin, and U. Dahmen, “Strain-Compensated Nano-Clusters in Al-Si-Ge Alloys,” Scripta Mater.54 (2006) 1973.
9. ^(E)A.A. Talin, E.A. Marquis, S.H. Goods, J.J. Kelly, and M.K. Miller, “Thermal Stability of Ni-Mn Electrodeposits,” Acta Mater.54 (2006) 1935.
10. ^(E)Y. Q. Wu, W. Tang, M. K. Miller, I. E. Anderson, R.W. McCallum, K.W. Dennis, and M. J. Kramer, “Microanalytical Characterization of Multi-Rare-Earth Nanocrystalline Magnets by Transmission Electron Microscopy and Atom Probe Tomography,” J. Appl. Phys.99 (2006) 08B515.
11. ^(E)E.V. Pereloma, I.B. Timokhina, K.F. Russell, and M.K. Miller, “Characterization of Clusters and Ultrafine Precipitates in Nb-containing C-Mn-Si Steels,” Scripta Mater.54 (2006) 471.
12. ^(E)A.J. Detor, M.K. Miller, and C.A. Schuh, “Solute Distribution in Nanocrystalline Ni-W Alloys Examined Through Atom Probe Tomography,” Philos. Mag.86 (2006) 4459.

Book Chapter:

1. ^(J)M.K. Miller “Atom Probe Tomography,” Chapter 8 in Handbook of Microscopy for Nanotechnology, N. Yao and Z.L. Wang, eds., Tsinghua University Press, China (2005) 237.

Conference Proceedings:

1. ^(J)M. K. Miller and K.F. Russell, “FIB-based Atom Probe Specimen Preparation of Powders,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 1294CD. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
2. ^(J)M. K. Miller “Characterization of Dislocations with a Local Electrode Atom Probe: Practical Considerations and Limitations,” Proceedings from Microscopy & Microanalysis 2006 12 Supplement 2, P. Kotula, et al. eds., Cambridge University Press (2006) 60. Microscopy & Microanalysis 2006 held in Chicago, IL, July 30 – August 3, 2006.
3. ^(E)A. J. Detor, M. K. Miller, and C. A. Schuh, “Grain Boundary Segregation in Nanocrystalline Ni-W Alloys: An Atom Probe Tomography Study,” Materials Research Society Symposium Proceedings 903E, E. Ma, C.A. Shuh, Y. Li, and M.K. Miller, eds., Published by The Materials Research Society, Warrendale, PA (2006) Z03-01. MRS 2005 Fall Meeting held in Boston, MA, November 28 – December 2, 2005.
4. ^(E)M.K. Miller, S. Venkataraman, J. Eckert, L. Schultz and D.J. Sordlelet, “Atom Probe Tomography Characterization of a Gas Atomized Metallic Glass,” Bulk Metallic Glasses, P.K. Liaw and R.A. Buchanan, eds., Published by The Minerals, Metals, & Materials Society, Warrendale, PA (2006) 77. TMS 2006 Annual Meeting & Exposition held in San Antonio, TX, March 12-16, 2006.
5. ^(E)M.K. Miller and R.C. Reed, “Analysis of Rhenium Clustering in CMSX-4 Ni-Based Superalloy,” Proceedings of Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol. 2: Displacive Transformations, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., Published by The Minerals, Metals & Materials Society (2005) 537. Solid-to-Solid Phase Transformations in Inorganic Materials 2005 held in Phoenix, AZ, May 29 – June 3, 2005.
6. ^(E)F.G. Caballero, M.K. Miller, S.S. Babu, C. Garcia-Mateo, and C. Garcia de Andres, “Low Temperature Bainite: An Analysis at Atomic Level,” Proceedings of Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol. 1: Diffusional Transformations, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., Published by The Minerals, Metals & Materials Society, Warrendale, PA (2005) 511. Solid-to-Solid Phase Transformations in Inorganic Materials 2005 held in Phoenix, AZ, May 29 – June 3, 2005.
7. ^(E)L. Kovarik, M.K. Miller, S.A. Court, and M.J. Mills, “APT Study of GPB Zones in Al-Mg-Cu-(Si) Alloys,” Proceedings of Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol. 1: Diffusional Transformations, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., Published by The Minerals, Metals & Materials Society, Warrendale, PA (2005) 301. Solid-to-Solid Phase Transformations in Inorganic Materials 2005 held in Phoenix, AZ, May 29 – June 3, 2005.
8. ^(L)S.S. Babu, M.K. Miller, and M.D. Rowe, “Fine Scale Precipitation in Haynes 214 Alloy,” Proceedings of Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol. 2: Displacive Transformations, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., Published by The Minerals, Metals & Materials Society, Warrendale, PA (2005) 523. Solid-to-Solid Phase Transformations in Inorganic Materials 2005 held in Phoenix, AZ, May 29 – June 3, 2005.
9. ^(H)R.A. Jaramillo, S.S. Babu, M.K. Miller, G.M. Ludka, G. Mackiewicz-Ludka, R.A. Kisner, J.B. Wilgen, and H.K.D.H. Bhadeshia, “Investigation of Austenite Decomposition in High-Carbon High-Strength Fe-C-Si-Mn Steel Under 30 Tesla Magnetic Field,” Proceedings of Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol. 1: Diffusional Transformations, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., Published by The Minerals, Metals & Materials Society, Warrendale, PA (2005) 873. Solid-to-Solid Phase Transformations in Inorganic Materials 2005 held in Phoenix, AZ, May 29 – June 3, 2005.
10. ^(E)I.B. Timokhina, M. Ryan, M.K. Miller, K.F. Russell, and E.V. Pereloma, “Microstructure and Mechanical Properties of Thermodynamically Processed and Bake-Hardened Nb-Mo-Al Steel,” Iron and Steel Supplement 40 Proceedings of HSLA Steels 2005 and ISUGS 2005, the Editorial Committee of Iron and Steel by the Authority of the Chinese Society for Metals (2005) 824. 5th International Conference on HSLA Steels held in Sanya, Hainan, China, November 8-10, 2005.

In Press:

1. ^(J)M.K. Miller and K.F. Russell, “Performance of a Local Electrode Atom Probe,” Surface and Interface Analysis38 (2006), in press.
2. ^(E)T.F. Kelly and M.K. Miller, “Atom Probe Tomography,” Rev. Sci. Instrum., in press.
3. ^(L)M.K. Miller, S.S. Babu, and J.M. Vitek, “Stability of g’ Precipitates in a PWA1480 Alloy,” Intermetallics, in press.
4. ^(J)M.K. Miller, “Atom Probe Tomography Characterization of Solute Segregation to Dislocations and Interfaces,” J. Mater. Sci., in press.
5. ^(E)M.K. Miller and R.C. Reed, “Local Electrode Atom Probe Characterization of Crept CMSX-4 Superalloy,” TMS Lett., in press.
6. ^(E)F.G. Caballero, M.K. Miller, S.S. Babu, and C. Garcia-Mateo, “Atomic Scale Observation of Bainite Transformation in a High Silicon Steel,” Acta Mater., in press.
7. ^(E)E.V. Pereloma, I.B. Timokhina, J.J. Jonas, and M.K. Miller, “Fine Scale Microstructural Investigations of Warm Rolled Low Carbon Steels with and without Cr, P, and B Additions,” Acta Mater., in press.
8. ^(E)M.K. Miller, K.F. Russell, M.K. Sokolov, and R.K. Nansted, “Microstructural Characterization of High Nickel RPV Steels,” J. Nucl. Mater., in press.
9. ^(E)M.K. Miller, S. Venkataraman, J. Eckert, L. Schultz, and D.J. Sordelet, “Atom Probe Tomography Characterization of Gas Atomized Metallic Glass,” Mater. Sci. Eng. A, in press.